Summary: I am trying to restore an old computer but I cannot get it to recognized the hard drive. The old computer is a 66Mhz with 16 MB Ram. When I try to ins...
Summary: Could anyone tell me the Exact steps to set up a new hard drive with win95.I might be on wrong forum but you guys or gals are the greatest..KEEP UP TH...
Summary: I work on computers that are donated to a school. I use a hard drive setup utility disk. Takes less than one minute on auto-install to install a HD....
Summary: I have a Compaq Desk Pro 386/20e. I want to upgrade it to Windows 95. I dont know if this is possible, for the 386/20e. I have a hard drive allread...
Summary: Yeah, well you can't just plunk it in. As suggested above, first the drive has to be set up in your BIOS through the setup screen, and must be cor...
Summary: Need to clean hard drive as someone tried loading win'95 on my SMALL pc and now I cannot reload win 3.1. I reach the 3rd setup disk and find an error ...
Summary: If the hard drive you removed is not the boot drive, you won't have any problems (other than less hard drive space.) Remove the entry for the Quantum...
Summary: When I init the PC, it starts in a test page to check the system. It passes the test of the floppy drive and the next step is the test of the hard dri...
Summary: Why is my hard drive not being recognised when I boot from floppy drive. If I press F2 soon after startup it appears in the BIOS setup main screen ! I...
Summary: The first thing to figure out is whether the connections on the hard drive is IDE or SCSI. The next is find out how many IDE controllers your commput...
Summary: I don't mean to be rude or anything.When formatting the hard drive you need to format C:/s Not format C: If you do you'll end up with a none system d...
Summary: Assuming you are still using the same system, or another one with and IDE controller, you should be able to do that just by setting the jumpers on th...
Summary: The hard drive on my Toshiba T4600C is starting to go bad and I bought a replacement on Ebay. My current drive is 324MB and the new one is 810MB and...
Summary: I have a Unisys PW2 Advantage (386-33; circa. 1991), with a Pheonix bios. It supports SCSI off the motherboard, however when I've tried to add a seco...
Summary: Are you sure these are the numbers off the hard drive itself, not the computer make and model? Just making sure. Try bootdisk.com about half way down...
Summary: You have to set one hard drive jumper setting to master and one to slave. If you are using a double ribbon cable, use the end for master and the midd...
Summary: ok great i picked up the hard drive and installed in my computer and setup it up in my bios now the sales guy said he did not format so since i have n...
Summary: When switch on PC read the screen which will tell you what KEY to press to enter BIOS. It should have some settings for autodetect hard drive or to m...
Summary: Thanks for your reply. I got into BIOS (I think. It has the setup for memory, display etc, and it has HDD capacity 80meg) but when I attempt to use ...
Summary: my hard drive is not booting up msdos command prompt. it says "non-disk error or disk drive error" the only command i can do is f1 to get to setup but...
Summary: I'm really stuck! I'm a teacher, and the only PC I've got for my class is a Gateway 486, running Win 3.11. It's a good machine; I've upgraded the me...
Summary: Hi metal_military_84: I think you're having hard drive limit problem with old bios (720 MB max limit). You need to make the HD into 2 smaller drives u...
Summary: i had a problem with my 486 computer running 3.11. it is in the computer itself and the hard drive is fine. I have another computer w/ a pentium 100...
Summary: Hi I have an old IBM-PS2 working with a 286/15mhz processor. (and 1024kb of ram) My hard drive doesn't start. When I put power on, I can see the littl...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
