Summary: i have a G4 powerbook 667mhz 256mb 30gb with dvd/cd rewriter. few days ago my comp showed a message saying that hard drive was full so i tried to do s...
Summary: I have Power Macintosh 5400/180, which has IDE hard drive and SCSI interface. Can I [1] boot from scsi hard drive instead of IDE hard drive? [2] Can ...
Summary: I tried to install a mac os 10.3 on the my g3, I recieved a message that the hard drive is full and I couldn't continue the install, I don't have the ...
Summary: Here is a strange problem. I had a hard drive go out on a old G3 Trayloading Imac. Customer is in love with this old machine so really wants it fixed....
Summary: You need a 2.5" external hard drive case. Then follow the take apart manuals on the Apple website to remove the hard drive. Once you get the hard dri...
Summary: Thank you so much for your advice. I do find it weird that my hard drive, ata-66 10 gig had a mechanical failure, a head crash told by my repair man....
Summary: I can run my G4 on either of my 2 hard drives, ATA internal. But when I hook up both, the machine does not fully boot up and the small mac face icon ...
Summary: I installed 2 Western Digital 100gb hard drives on a G4. When I right click on a drive & show info, it only shows each drive as having 31.49gb capacit...
Summary: For an IDE hard drive to work on MAC OS the computer must have a built in or subsequently installed IDE interface/controller/circuit board and the dri...
Summary: I am having trouble with my Mac. I installed a 2nd drive and it worked quite well for a while. But every now and then it would not show up when I wou...
Summary: Hello. A very scary thing happened to me last night! My internal maxtor drive (master drive) 60Gb 3 partitions just died last night without any reas...
Summary: Well, a 4-year old machine... you can bump that puppy up to a 100Gb hard drive if you necessary. Dealing with music requires A LOT of extra space....
Summary: Hi, im new here :) Ummm, here goes nothing..... I just got a seagate 160gb external drive with usb2 and firewire. I plugged it into my winxp system an...
Summary: What if any software program(s) are available that allow a Mac user to copy streaming audio such as a radio broadcast over the net to my hard drive...
Summary: Introduction I have examined Mac OS X extensively, and discovered 1) that cloning is possible from OS X with the utilities that Apple has provided ...
Summary: This is in follow up to my original problem message post# 4520. I finally got a new logic board and installed it yesterday. Everything seems to be wor...
Summary: Thanks for reply and suggestions. I have the iMac DVD edition. 400 MHz PowerPC G3 processor. 13 GB Ultra ATA hard drive. I bought it Y2K. It has 2 Fir...
Summary: I have a 233MHz iMac and just upgraded the RAM and HD. The computer recognizes both upgrades but my OS will not install properly. I can install 9.2...
Summary: The three things make an IDE hard drive compatible with MAC OS are 1) it must support the "identify" command 2) it must perform at PIO mode 2 perfo...
Summary: I have a Citi Pcmcia card to Ide adaptor with an evternal HD attached. I can get the hardware to work on 9X but does not know that there is anythin...
Summary: I try to install mac os x 10.2.4 in power macintosh g3 destio with 30GB hard drive but i can't do it becouse keep tell me that i need 8gb first i ...
Summary: Part #1 I recently bought a PowerMac 8100/80 from my place of work. The Mac had no hard drive, so I took the drive from my PowerMac 6100/60, and put i...
Summary: why replace, if you have the room inside the comp, simply add a seond HD 1) things should be turned off, 2)have an empty bay inside comp, and an ex...
Summary: Tim, That sounds like the beginning of a Directory error. Your System Directory is like a library that holds information about every file, folder, ...
Summary: 1) your original hard drive should be set to ID 0, the bigger HD should be set to ID 2. 2) If second hard drive must not have any terminator ON and it...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
