Summary: Does anyone know of a BIOS hack that will allow Vcore adjustment? I have a Chaintech AJA2E mobo & there's no adjustment...just auto-detect. It appears...
Summary: Could somebody tell me where I could find the latest bios for ECS k7vta3v3. Now I have got 3.0 D version form 09/02/2002. My Dunron CPU is recognized ...
Summary: jam thanks again, i want you to know that i was searching for the bios during a lot of time, and i found zida page, but i was not sure if it wasa corr...
Summary: No, you need the BIOS for your motherboard. What's the make/model number? The BIOS file & flash utility program should be available at the manufacture...
Summary: I don't know if I'd recommend use a software program for your ASUS board...those programs are usually used for boards that don't allow FSB changes, or...
Summary: Talk to YOYO...he's recently gone thru it all My Kingston RAM defaults to 8-4-4-3. Try using the "Optimal" setting & see if that helps. You may wanna ...
Summary: Do you need to change the Vcore to overclock? i overclocked my XP2500+ up to 3200+(it shows up as 3200+) without changing Vcore and just changing the ...
Summary: a google search will find you both authors. afaik the only third-party bios is the ecs k7s5a bios, one written by honeyx and the other by cheepoman. ...
Summary: Hi, recently I have been on the quest to get the most I can out of my CPU...i'm sure you all understand =D...but I've hit a roadblock: I'm currently r...
Summary: Hey All, Does anyone know of or have a Bootable Bios disk for the ECS K7S5A, i was upgrading my Bios the other day and it died, now it just beeps when...
Summary: I've used the ecs standard bios and also both the cheepoman and honeyx hacked versions for the k7s5a and all three work fine. Currently I run cheepom...
Summary: - Lower the CPU Freq to 250MHz (I believe this is what you're calling HHT). At 269MHz your RAM would be running at 224MHz & my guess is that's too muc...
Summary: Hi all, I'm getting incorrect (I think) Bios temps for my CPU altho am under the impression these are the most accurate ?! At idle I have 67/68 temp i...
Summary: up the vcore & watch your temps thats what johnoh meant ! dont boost it up to 1.8 just a notch and look @ temps untill its stable & temps are under 50...
Summary: Here is your bios http://www.fic.com.tw/support/motherboard/bios.aspx?model_id=107 I'm not sure what you mean by OEM. Do you mean a third-party hacke...
Summary: Hello I've got a XP1700+ (JIUHB, 1.5v) and a K7s5a pro. I know, it's a horribly mismatached pair. The motherboard came with this program called 'WinFl...
Summary: Is there a 1Mhz increment in the BIOS for the FSB? If so, try decrease from 133Mhz and down to 100 to see when the system stabilized... For motherbo...
Summary: Do any of you guys know were I can get a good bios for my PNY FX 5200 I downloaded one from White Bunny and it slowed my card down a lot and it won't...
Summary: your board is one of the few nforce2 boards not built for overclocking. The nf2 chipset allows it, but asus (they own asrock) did not write a bios fo...
Summary: make sure you have the latest bios for your board. you might need to update it to use the 2100 xp. also make sure you have the correct Vcore to the ...
Summary: have a Soyo Dragon Plus and a unlocked Athlon XP 1700+ AGOIA, I'm trying to overclock it as much as possible, my PC is water cooled so it also helps....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
