Summary: Hi Everyone, I have got a Linksys WAG54G V.2 Wireless Router and Modem and could not get the signal out to a far flung area of the house. I purchased ...
Summary: If its a Winsock Problem these have worked on my systems before. This file is a repost of a post that helped me. I can no longer find it to point you ...
Summary: Ever since we got this computer it's been a pain when it comes to networking. It seems that using the network for it is "radioactive" and it can only ...
Summary: I have a little linksys router that keeps acting up. For the past week my best network uptime has been 4 hours, the norm is about one when it's doing ...
Summary: Hi Folks, i would like to force remote laptop user to use vpn via their home broadband conections before they go on to the internet or the company dom...
Summary: There could be a number of problems... How new is the RV082???...it is possible it is a "bad" router, although in my experience that is probably not t...
Summary: This is really getting annoying now. I've even formatted the HD and re-installed Win XP (for other reasons) and this still happens. Every time I reboo...
Summary: Well, I solved my last problem, now I'm looking for a program that can send the DHCPRENEW message to force hosts to renew their IP addresses. I can't...
Summary: Have the OS CD handy, Remove TCP/IP, reboot Add TCP/IP back in, provide the disk, reboot. That should force it to go through the bindings process, and...
Summary: I have recently updated my linksys router (BEFSR41)Firmware to the most current edition.Since then I have been losing my internet connection on an ave...
Summary: I would like to be able to access two domains from one workstation. Right now the only work around is quite lengthy. I have to remove myself from on...
Summary: Sounds more like a browser issue then a name resolution issue. What you need to check is that each workstation including the NT server which is acting...
Summary: Sam, I am having the same problem (can't change TcpPort). I have tried your solution prior to reading your response but, it didn't work. I'm running...
Summary: I think this is a driver or spool issue, but not sure. Here it is: 1. Small office network of 4 computer using a an 8 port switch. 2. One printer is p...
Summary: I work in a small school and we have 2 PC exactly the same running windows XP pro. Both PCs are connected to the network. I have attached a HP printer...
Summary: My internet connection occasionally goes offline (LAN > SpeedTouch510Router > ADSL) Probably due to not having all the outlets fitted with a splitter....
Summary: I have been trying to take a backup of files of a user on a NT workstation by copying files to my NT Server. Halfway through copying the files the use...
Summary: Hi When I try to “Make New Connection” (dial-up networking) on Win 98s.e. The "Welcome to Dial-Up Networking" dialog appear, but when I click "Next...
Summary: Notice that I'm using ME. Other people replied to my previous posts with networking instructions for XP. That's of no use to me since I don't have XP....
Summary: Sygate doesn't allow traffic in based on port. It's based on application. Therefore, most likely (and I suspected this) it's an exploit of the softw...
Summary: If you are doing this with microsoft products use sysprep and force pnp on reboot. I have installed the same image on 486, through brand new systems j...
Summary: Some problems with a Windows95 system resulted in me having to upgrade the system to Win98SE for a client. The Win95 machine was set up to log into a...
Summary: I have a Linksys WAG 54g wireless modem router. I cannot transfer files between computers as the router always crashes about 10 seconds into the trans...
Summary: Hi, I am connecting my xbox 360 through a hard-wire into my computer, which is in turn connected wireless to my router. When I create the bridge after...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
