Summary: I am about to go out and buy a new vidoe card for my laptop its the Toshiba Satellite 1800 Series and i am going to get a eVGA GeForce MX4000 128MB Vi...
Summary: Hello everyone I have the following computer 386 20 Mhz CPU no hard drive, but the big follpy drive and ram with vidoe card... Is there any way to fi...
Summary: I have the dell photo printer 720, It wont print black correctly, it will print the first couple lines and then fade to nothing, every time, Ive repla...
Summary: I believe my motherboard and cpu is dusty, (well not visually) any effective tips for cleaning those hard to get areas inside the pc case and around t...
Summary: Thanks kevin. i tried simmtester, and here's the problem: my 256 MB is two 128 MB modules. i ran simmtester and it said FAILED about a lot of tests, s...
Summary: Wouldn't make sense to have an automatic rebuild, would it? Just because you put a new drive in the system you wouldn't want it to assume you are want...
Summary: All of them will function as a CD-ROM, 2 of the 3 will burn CDs, & 1 of the 3 will burn DVDs. Seems to me the CD-ROM is the odd man out...there's no ...
Summary: I have a question regarding Compatibility of DDR 333/400 memory with my i845PEBT2. hopefully someone can asnwer as I only have minimal hardware exper...
Summary: i haven't really checked the CPU, i just dusted off the fan on top of the heat sink, but not too much b/c i didn't want the dust to fly everywhere on ...
Summary: Like I said in an earlier post, it's best not to pair up 2 optical drives or 2 HDDs. If you have both optical drives on the same cable & you burn "on ...
Summary: Asus motherboard have a little fan on it, i think it's for the cip-set which is making a lot of noise when it's damaged. Mine is running like that sin...
Summary: I have a Geforce 4 mx 420 and this baby flies...i havent had your problem but play around with the advanced display settings a bit and see what happen...
Summary: i tried to increase the the speed of my other pc from 133 mhz to 266 mhz .up on removig the cpu chip and instralling the 266. i now have no vido view...
Summary: A wrist strap connected to ground will help, usualy a radiator or cold water pipe. Touching the metal case with the power lead plugged in but power t...
Summary: If you "copy on the fly" it will be much slower with that config, and you are more likely to get buffer underun. ____________________________ ...
Summary: Ive had both and the P4 seems to outperform Athlon on Graphics and speed, which is what you want, unfortunatly P4 is a lot more expensive, so if you'v...
Summary: Depends on the design of the IDE interface chips and the drivers. Some older designs would only run devices at the lower speed. Others allow on the fl...
Summary: I had what I thought was a memory issue in my old computer (asus a7n8x-dx 1.4, 2700+ XP, ATi 9800 pro): basically the thing would hang every time I tr...
Summary: "Better to not have them on the same IDE if that is possible" Just to elaborate a little more on Doctor1954's statement...what he wrote is especially ...
Summary: ooo...no...i thinki see why you are questioning...When i paasted the info nvidia goes with the vido card GeForce4 MX 4000 right below...i don't know w...
Summary: heres what i found about my sata drive, and hows its configured in my computer,,i again just dont know how to get the flashing cursor in the top left ...
Summary: Hi TJ That should work nicely, nice board, god processor, and for the vido card. Well my personal opinion only, I would choose the ATI card. As for th...
Summary: Hey guys thanks jam for your suggestions and i have carried out these tests but nothing has come of them, the memory test passed with flying colours a...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
