Summary: Hi, I've done a few searches on this and read at least 30 posts from this site and others, but it all goes a bit over my head. I've just completed my ...
Summary: During boot time I get this error Bringing up Interface eth0 : [FAILED] Due to this the boot time is unacceptably long. However the system boots fine ...
Summary: Hello, I have been using Redhat 8.0 for a while. I just upgraded to Mandrake 9.2 With RH 8.0, eth0 would give an "ok" but upon log in, it gave me some...
Summary: Hi, there, I installed Linux 7.1 on my computer, each time when I start the computer, other checking list are OK, but "bring up interface eth0 fails"....
Summary: Hi again... I got to one labtob & one desktop @ my home....and i wanna create small home networking with those PC.my labtob Os are Mandrake 9.0 & ...
Summary: Whe I started Linux 7.1, the system hang up at "Bringing up interface eth0:", then "failed" message come out. What was wrong about my installation. Th...
Summary: on boot, when "Determining IP information for eth0" it fails, and says the to check cable. The cable is fine, it works on my WinXP System. I'm tryin...
Summary: Hi there, I have 2 network cards eth0 and eth1. I attached eth0 to my Cable modem and eth1 connected to my another machine and I set it with 192.x.x.x...
Summary: Here's a strange one... As Mandrake 9.2 boots, I can see that bringing up my network interface (eth0) failed. But it really didn't. Once I log on ever...
Summary: It worked yesterday, but this morning when booting up, it failed to bring up eth0 (Determining IP to eth0 ... failed). I thought that the network's d...
Summary: Well, I just tried wiping teh drive, and installing Mandrake ... same story. During bootup, I get "eth0: FAILED", with "FAILED" in red letters inst...
Summary: I'm trying to get a WaveLAN Turbo Gold card working with my Compaq Armada 7380DMT laptop, but can only get as far as getting a single green light alwa...
Summary: hi i just got 2-way cable and they installed a kingston 100tx ethernet card (Intel 21134/2 based ethernet controller). in mandrake it's detected as DE...
Summary: Well it was set to static, I have a home router, but because of my kids ps2 game, I had to put it back to automatic. dhclient eth0 gives me no access,...
Summary: i am trying to help a friend get online with redhat 8 on his new computer. seems easy but i am having trouble. you can see on bootup that initilizat...
Summary: I posted this earlier but I got no suggestions. I've been trying to fix this all day. I can connect to the internet fine with RedHat 8.0, and with Kno...
Summary: Hi I installed RH 7.3 on my Dell Inspiron Laptop. The installation went fine and I can start linux. However during the startup I get the error; Brin...
Summary: Hello, Did anyone have success connecting to @home cable with Mandrake 8.0 ? I am confused does MK uses dhcpcd or pump ?? I tried dhcpcd didnt work, i...
Summary: I have a small home lan with three windows computers and one linux computer. I've had the three windows computers running perfectly for a while and r...
Summary: My previous post, along with all its replies, seems to have vanished! Did somebody nuke them? Anyway: I still can't get it to work. Someone s...
Summary: NineKay thanks for that I will read and try to find out how to achieve what you said. I get the message at boot up saying eth0 Failed need to get the ...
Summary: Hello, I needed to rebuild the kernel (2.4.2) on my red hat 7.1 box in order to get a new telephony card working. The new kernel boots fine but now my...
Summary: How do I get my NIC configured properly, I have a Linksys EtherFast series 10/100 LAN card (that according to the box is Linux compatible) I am runnin...
Summary: One more thing. If the modules does not get loaded at boot, and eth0 fails, then add the line: modprobe 8139too to the top of /etc/sysconfig/network ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
