Summary: Hi,i am a trying to establish a vpn connection between an Nt40 server(sp6a) and a W95 client.when the w95client tries to connect using the VPN dun, it...
Summary: I would wish to setup a VPN Server using NT4 SP5 ... can anyone tell me how to do this. I want to be able to access files on the server from a laptop ...
Summary: I am getting ready to go to active directory and install a new PDC with windows 2k3. I was told that windows won't let you demote a BDC to a member se...
Summary: Hi, I was told that there is a utility out there that will help in demoting a pdc or bdc to a member server. Have any of you guys seen this or is ther...
Summary: In a site of approx 25 users, one particular user when logging onto a NT box and net useing to a Netware Server, asks for passwords even when specifie...
Summary: We configured a VPN server with WindowsNT4.0 Service pack5.0 using PPTP over TCP/IP and VPN client as Windows98. Both the VPN server and VPN client wi...
Summary: I have an NT 4.0 Server that is a PDC that also needs to be a VPN server. This server is connected to the internet 24X7 via DSL modem access. I need t...
Summary: I am running a Windows NT 4.0 Server (SP 4) that currently has 1 100MB NIC card that connects it to a switch. The server is using a class c IP address...
Summary: I hope you like a challenge, because I have a rather complicated issue (...that probably has a simple answer!). My machine is an IBM Netfinity 5600 Se...
Summary: Hihi :) I have a problem at the moment.. trying to connect directly a NT workstation to an XP laptop with rj45. The XP machine, after a long acquiry, ...
Summary: Yes, it can!: Make sure the Remote Access Service is installed. If it's not, add it first. Then do the following: 1. In the network control panel, a...
Summary: sorry, I got cut off. After you re-apply the permissions promote the BDC to a PDC. Another option is, make a back up of your current server including ...
Summary: It depends on how your internet connection is set up. If it's through a hardware router, the router must be able to allow PPTP or IPSec traffic to pas...
Summary: I am still trying to back up a web server from a main server...I mapped to drive letters to the web server and added these new drive letters to my syn...
Summary: HELP! At home here we have a LAN with a NT server used to connect to the internet (must logon onto NT domain). When i connect to it with Windows XP a...
Summary: I would like to connect to the internet on my second pc which has windows NT installed, my promary pc is Windows Xp and is connect to AOL Broadband, I...
Summary: I have just installed a VPN server on my Windows NT 4.0 Server SP6. When I was testing it out after like 7 seconds I am disconnected from the VPN serv...
Summary: Hi , i am trying to get a VPN connection from a remote client running w95sp1 , to a nt4 sp6a server. The remote client attempt establish a communicati...
Summary: this could be due to a DNS error, or if you have a firewall/proxy the ports for POP3 and SMTP are not open. Or simply you have the wrong entry for you...
Summary: I just downloaded the software to enable me to gain internet access through aol and was surprised to see that there was no version available for downl...
Summary: I have been trying to set up a RAS server running Windows NT Server 4.0. I am using a WIN95 Client. However whenever I dial into the remote computer...
Summary: Im trying to connect a G4 to an NT Server. I have already started the services and created the volume for the G4. When I try to locate the server by I...
Summary: Hi pdn, hi everyone It's nice to know I have been able to help you so far. :-) For your NetMeeting problems, see the article in the following link, it...
Summary: I have a remote user who I cannot get to connect to our VPN server. The remote user is on NT and our VPN server is the MS NT PPTP/VPN type. He connec...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
