Summary: OK, I'm cheap. I have some free ECC DDR PC2100 memory modules that I'd like to use in a motherboard that takes DDR. Since I don't have a motherboard t...
Summary: i have the ECS K7S5A motherboar it supports both ddr and sdram on it, i bought 256mb pc2100 ddr for it and tried it but the motherboard wont boot or a...
Summary: I have a Anthlon 1400 mhz computer aand running windows me.The problum is this I have 512 ddr memory installed in my system propertys it says I only h...
Summary: nope it won't work. nForce chipsets are not ECC compatible. nForce is made for performance and speed and killed support for ECC since this is slower t...
Summary: When I boot up it shows my 400 DDR memory registering at 166 Mhz. How do I get my 400 DDR to its full capacity? I am using an Asus A7N8X motherboard....
Summary: Technically there are some issues there: 1. What type of DDR does your mobo support? DDR (I Know) but ECC, Non ECC, 2.5 CAS, 3.0 CAS, Buffered, Unbuff...
Summary: whats up fellas?i wanted to ask you guys a question?I want to upgrade my cheap ram to some good dual channel ram,and my mobo accepts Dual-Channel DDR...
Summary: Leuk, here is what your board can take... you've got 3 x DDR DIMM Sockets with a maximum of 3 GB unbuffered *PC3200 /PC2700/PC2100/PC1600 non-ECC SDRA...
Summary: When memory is advertised as follows: "512MB PC3200/2700 DDR Desktop Memory Module" Does this mean that if the motherboard supports the PC3200 s...
Summary: I'm trying to install another stick of 256 ddr ram to my computer. When I do this I it will load almost all of the way up, but then I get the Blue Sc...
Summary: I was wondering what I should do. I am looking at the ASUS P4S800 Motherboard. If I use DDR 400 (PC 3200) Ram, it allows 1 Gig of Memory total, but ...
Summary: I recently purchased a Corsair XMS Platinum(DDR 1GB TwinX1024-3200C2PT) And for the record I'm a "newbie".I built this baby a week or so ago, but I'm ...
Summary: I have an intel D845GBV motherboard and i want to buy memory for it. i know it takes non-ecc Pc2100, but what about "high density" and DDr memory? ...
Summary: Can DDR-ECC be used with Non-ECC DDR? My PC currently have 256MB of ECC-DDR. I'd like to add another 256MB, but ECC is very expensive. emiko ...
Summary: Hi Octo, My OS is WinXP Pro, so there's no problem there. Also, my computer was build by my cousin and he used a DDR SDRAM PC2700 type. (it is workin...
Summary: I have a Anthlon 1400 mhz computer os is windows me.I was woundering if someone would know a website I could check config setting for my bios.My mothe...
Summary: Can I use PC133 memory modules in a motherboard that uses DDR 400 memory? I know it will run slower but will it fit and not hurt the motherboard? Th...
Summary: My friend has a older dell computer I forget the model but when I looked last it was a P4 2ghz and had 256mb DDR 2700 ram. 2x128 Quite a few months p...
Summary: Just bought a new ASROCK M/B and an AMD Sampron 2200. Assembled all components but the system did not boot. Found out it’s the DDR 2700 512M caus...
Summary: Hi all, I am a little confused about memory specifications. The computer I am currently using has 1 GB of DDR 3200 memory. I also have 512 MB of DDR 2...
Summary: no u can not use ddr and sdram together but u can use ddr with different speeds, however ur motherboard will only set the speed of the memory to the s...
Summary: I have a DDR Ram that is ECC that is 512mb, and the motherboard does not support ECC. Would I still be able to use this Ram even though my motherboard...
Summary: i have a motherboard ecs k7ama and i bought a 128 ddr pc 2100 memory and i just don`t know how to set the jumpers and very confuse about these, btw, t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
