Summary: Make sure you are using Windows NT multi-Prococessor edition. If you are not, remove on of the CPU's and try to install NT. If installation is suces...
Summary: I am hving one p3 machine installed Win Nt server. I put a copy of Win Nt in that server. Now I want to install the same in 4 machine via network. Pls...
Summary: DEAR/SIR I have problem to install win-NT every time i install to half way it is come up the message say my harddisk sector is large than 1024 ,so ...
Summary: I got a new pentium 3(800mhz proc. 20gb hdd) with win me(Dutch). i wanted to install win nt workstation 4.0. formated the hdd. problem: cant copy a co...
Summary: I have just installed Win-NT 4.0 as primary domain controller. The only user is Administrator. I have 5 computers running windows 98SE. I have one 16 ...
Summary: I have trying to install WIN NT on a system which has WIN 98. I was done with the ms-dos portion of the set up. after i restarted i got the following...
Summary: Hi, I have formatted my harddisk using "format" from a Win 98 boot disk, and want to install Win NT Ws,....can anyone guide me on how to do this!?!?!...
Summary: Hi, When I try to install Win-NT 4.0 on a 1GB FAT partitioned hard drive, I get so far and get the following messege: “Setup is unable to locate the h...
Summary: I am trying to install Win NT 4.0 onto an old pentium pro computer. I am using a new Seagate 20GB HDD with the older BIOS which only supports up to 8....
Summary: hi i want to install WIN NT 4.0 on my pc my c drive is FAT16 and other drive are fat32 but when i install winnt 4.0 during setup when i select c driv...
Summary: I have been having problems installing windows NT Server 4.0 on my computer. I need to install it on an older HP with a 1.0Ghz Pentium 3, 512MB of RAM...
Summary: I install NT4 Multi Processor edition on a duel PIII 500 system 512 mb using a BX motherboard, the partition sizes are C: 2 gig (FAT16) and D: is 11 g...
Summary: Is it possible to install Win98 on a machine that ALREADY has NT installed with NTFS? I have a 2nd partition that is FAT? I know the ideal way is to...
Summary: I need to install windows nt 3.1/ I just downloaded the boot disks. I also have windows Xp in a seperate partion. If possible I would like to leave it...
Summary: I have lost the setup.log file by pretending run uptomp.exe (processor upgrade utility), I stopped the process during winzard not in upgrated process...
Summary: I just inserted a Linksys EtherFast 10/100 LAN card into the PCI slot of my HP kayak machine. It's a Pentium 400, dual processor system with 2 SCSI ha...
Summary: Hi, I am installing Win NT on a Machine. AMD Athlon 550 128MB, 20GB, ASUS K7M Board. When I start copying the file to disk it comes up with (set-up wa...
Summary: I have been trying to install Win NT server 4 and it keeps telling me that my disk has more than 1024 cylinders. Then it says it can't find my partit...
Summary: I am attempting to install Win Nt 4.0 on a 9 Gb hard drive. I have already partitioned the hard drive into 3 partitions at 3 Gb each with NTFS using p...
Summary: Problem 1 ======== I am not able to recover the MBR (Master Boot Record) to use Win NT boot manager for dual booting with win 98. My SetUp ======== I ...
Summary: I recently had to install Win NT on a machine that had Win 98. All the hardware is EXACTLY the same. The Diamond Stealth II G460 video card that worke...
Summary: I have been trying to install Win NT server 4 and it keeps telling me that my disk has more than 1024 cylinders. Then it says it can't find my partit...
Summary: I had a lilo boot before, then i deleted all the partitions now trying to install win NT 4.0, problem is that when setup copies all the contents and a...
Summary: I have partitioned my drive as follows: Disk 1 1)C: Primary DOS Partition (FAT 16) 2)Extended DOS Partition E: Logical DOS Partition (FAT 32) F: L...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
