Summary: sounds like you upgraded not dual booted. usually works like this if 98 on 1 HD("C") partition drive into 2 install 98 into "C" partition from within...
Summary: boot with ME bootdisk, at A> prompt type sys C: which will erase dual boot MBR again next boot with 98 floppy and at A> prompt type format C: ...
Summary: Hi everyone, I had the dual boot of win xp and win server 2003 without any problems. But when i re-installed win xp in the partition C, it overwrote t...
Summary: Hi, I originally had windows me already on the C drive. I then installed windows xp on the d drive, giving me the option to dual boot. I then had a ...
Summary: It will cause problems no matter what drive it is on because it will over right the MBR which resides on the C:\drive The mess it creates can be un-d...
Summary: Just editing XP boot.ini may not work. XP doesn't 'know' W2K is there. As I understand it, XP needs (in effect) to find/discover W2K for itself by det...
Summary: Had a Dual-Booting in two different HDs, one running ME and the other an XP-Pro. As the HD that had the Millenium went bad, I had to re-install it. Fo...
Summary: A properly installed dual boot is done by installing 98 first and then 2000/XP so that the built in bootloader can do it's job. I'm not sure what you...
Summary: No problem. I've been there before. First you have to partition your drive. I recommend using Partition Magic for this and you won't have to wipe out ...
Summary: I want to Dual boot Windows 98SE and XP, currently XP is installed on my SATA drive which is my secondary drive, and the xp boot files are unfortunate...
Summary: This morning I tried to dual boot windows an linux for the first time. So, I deleted all partitions from my drive, made an ntfs partition at the begin...
Summary: I have recover the MBR from the fdisk command under Windows 98 start up disk. Then, I use the SYS A: C: command. The boot record was restroed to Wind...
Summary: Easy, Go ahead and format your 60Gig and install XP, then install 98 on your 8Gig. Do this seperately like each was the master drive, then you hool up...
Summary: Gareth is right. Win98 does not utilize a boot loader for dual boot configurations. You have to install '98 first and then install XP. XP will load...
Summary: reformat and reinstall, but don't do an FDISK/MBR. once 98 is installed, boot from the XP CD, do a repair install, and run FIXBOOT to repair the dual...
Summary: If your bios has the option of booting from differant drives (IE.. HD0, HD1, HD2) I would recommend using that feature... the trouble with using the ...
Summary: Hi I have XP pro & windows98 as dual boot, win98 on partion C and XP on D , I use win98 to test some new program and new games ,that cause many prob...
Summary: Sorry for the delay. I had started posting back before lunch and realized I should double check what I was going to say (ie DO IT). 1. First boot XP ...
Summary: Sorry, I don't know ins and outs of that particular Toshiba model. I could not find any mention of the "disableredirect" in Rojacks Pot BIOS guide. Un...
Summary: That error messages reads as though for XP... Re-install ME over itself via the standard ME setup routine (bootdisk and CD or a CD boot) - not from wi...
Summary: First copy ntldr/ntdetect.com/boot.ini from current XP c: root to a floppy; keep it safe. Then install the '98 drive (to be) as Master to XP drive (as...
Summary: You can do dual boot for Linux and WinXP. First u have WinXP installed in the 1st HDD (Master) then install Linux on the second HDD (Slave). The GRUB ...
Summary: "I want to install it (W2K) after XP (so I can get rid of it when it expires)." Do you mean install W2K server second (after installing XP first)? If ...
Summary: As blackbill says, Mandrake will set up the dual boot for you. If you ever decide to wipe out your Mandrake installation and go back to just Windows ...
Summary: I have a Dual-Booting implementation resulting from 1) a ME install on C: drive, Primary IDE, XP-Pro install on D: drive, Secondary IDE. My C: drive (...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
