Summary: jopa: NT is a little difficult to load scsi hard drives. You will need the scsi drivers for your host card on a floppy. Now using the three NT Boot Di...
Summary: This is a continuation from my first post...so to be up to date read part 1...I felt that maybe my replies wouldn't be read seeing how far down the li...
Summary: I am trying to set up NT4.0 on an already existing Win98 machine as dual boot OS. I have two IDE devices. The first being an Adapti IDE CD-Rom which N...
Summary: Hi. I Have a server with 5 SCSI Hard Drives in and it works fine. However when I stick in a new SCSI Hard Drive it displays it in the SCSI BIOS on boo...
Summary: I have 2 computers running NT. One had an external scsi hard drive. We would like to give the other machine to an employee but when we hook the hard...
Summary: I recently purchased a Western Digital 30 GB hard drive. I can not get windows NT to install on it. Originally, I had a dual boot system in mind. I...
Summary: I have 2 SCSI Hard drives(seagate baracuda & Cheetah) and am at the screen in Windows NT Workstation installation where it asks to specify additional ...
Summary: partition your hard drive using dos. make it dos bootable. after that try to install win nt from the WIn NT CD ,there while installing it will ask u f...
Summary: Help Me all you good people i`am puting N.T 4 server on a 500Mhz 64 Pc. I have a scsi card with a tape backup and hard drive the hard drive is 9G and...
Summary: When I try to install Windows NT 4.0 Server, it says I dont have a hard drive. I have Windows 3.1 installed on the disk and I have the I386 folder ...
Summary: I am looking for DOS driver for SCSI DOS driver for Archive Python 02779-XXX tape drive. Check everywhere. Possible: it did not exist. This is my last...
Summary: Well, I just replaced a SCSI hard drive on an NT Server machine after Commomwealth Edison blew out a transformer. Sometimes it's hopeless to try and...
Summary: Cleo, Thank you for your reply. My hard drives are SCSI hard drives, not IDEs. Does that make any difference? Also, I am still using SP4, do you think...
Summary: I am looking for a NT driver for a Panasonic Optical Disk Drive. The model for this drive is LF-7300A. I have tried Panasonic's homepage and they we...
Summary: I trying install Windows NT 4.0 (SERVER) on SCSI Hard drive I useing "Adaptec 29160 SCSI"card And " Compaqpc Atlas 10k 18 WLS " Hard drive. Hard drive...
Summary: According to this link, Iomega has a driver for USB Zip drives connecting to Windows NT4.0 units. http://www.usbman.com/Win%20NT%20USB%20Guide.htm ...
Summary: you should clone your hard drive or use Norton Ghost or something. Search this forum for cloning hard drive or google for norton ghost. There been a ...
Summary: Update your service pack to 5... NOT 6.a and see if it works... unless this is supposed to be a server... then you should be using server 4.0 with the...
Summary: A little more info for scsi hard drives: You must have a ribbon with an "active" terminator on the last connector. The hard drive can be on any other ...
Summary: Our office server (a Compaq 1600) is running NT4.0 with Exchange5.5. Everything was going well until I rebooted the server. No changes had been...
Summary: We are using SCSI Hard disk in Compaq Prosignia 300 Server machine and whether it is possible to add a another hard drive of General Model with that m...
Summary: I have xp pro at home.. no problem. But I have windows nt at work, and there is no usb support. Can I use some sort of adapter to connect my maxtor 50...
Summary: Install the drive using the slave jumper on 2nd, if you are not using cable select.Make sure that you have auto in the bios for the hard drive. use fd...
Summary: I found out what my problem was. Usually Generic SCSI drivers for ADAPTEC are embeded into the installation process of NT 4 however I have an Ultra2 ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
