Summary: I accidentaly crashed my 6.2 five months ago and I didn't have the disks for it, so I had to upload 5.0. Recently I came into a set of the 6.2 install...
Summary: For Win31, dos6.22 setup disks go to "http://www.kewlone.com" if you read the whole page you will find connections to some very good places. Even set...
Summary: Thanks X86. I did have a legal version of the original installable DOS 5.0(?) on 5.25 disks (but now long gone along with the 5.25 drive ), and the...
Summary: I've got a 386 and have run Fdisk and Formatted C: I downloaded a Dos6.22 Boot disk and three more disks of Dos6.22. The system boots ok from the bo...
Summary: You have a full install 6.22 disks to do what you want you need to upgrade from 5 then 6 then 6.22 or you will have to reformat you can not upgrade fr...
Summary: Thanks Wengier, 1. I will try it out. I hope it works so that i can run win98se (I have not loaded your win98se gui yet) on my primary c drive and dos...
Summary: I lost my original DOS 6.22 setup disks BUT I found two disks labeled "Dos 6.22 Upgrade" I try to run the setup but since this PC is wiped clean, the ...
Summary: I have the following: 1. OLD Win 95 system that I want to blow out and replace with DOS. 2. MS-DOS 6.22 upgrade disks that I can't use with the Win...
Summary: 6.22 full version wont overwrite 5.0 you will need the 6.22 upgrade. if you have the full version go to dos prompt type fdisk delete the primary dos ...
Summary: Make Win98 startup disk (From Control Panel|Add/Remove programs). Reboot with it and you have access to your CDROM. Yes, with DOS6.22 disk I converted...
Summary: Need Chinese Dos6.22 for own use. please send me 3 email. each contain each disk zip... means. that each disk you zip and send to me in 3 email. i thi...
Summary: Is it possible to install Dos6.22 from a CD? Like make a bootable cd, then run setup... I guess it would work, but i want to know, when the setup ask ...
Summary: I try to copy the DOS6.22 Setupdisks onto a cdrom for faster installation but it doesn`t work. If I start setup from CD-ROM the puter asks me to inser...
Summary: I need a way to support LARGES files (over 2Gb) on a single hard drive on a local machine between DOS6.22 and winNT nb: FAT16 support max 2Gb FAT3...
Summary: you will also need to 'md c:\stepup', then 'xcopy a:\*.* c:\stepup' all 3 dos6.22 disks, then 'c:', cd c:\stepup', then run 'setup' which will expand ...
Summary: hello i want do create a Dos6.22 cd-rom to install from cdrom drives to hdd i have all 3 disks of dos & i have easycd platinum ver5 i already wasted ...
Summary: You can't boot if it a upgrade disk. Start with 6.2 then install 6.22. And by the way 6.22 will delete doshell. Why would you want 6.22 anyway 6.2 is...
Summary: got a gateway 486dx/33 formated c drive to try to install win 95 did not back up nothing because it was givin to me now I want to just run dos6.22/win...
Summary: Thanks to everybody for their valuable suggestions. After reading all suggestions, I think, there is no such easy tricks to build a boot menu for DOS6...
Summary: The object is a 6.22 boot disk with no other files or directories on it. So delete all the files and remove the directories. This should leave ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
