Summary: I've run sndconfig on my redhat 7.0 machine, and it says that it found my soundcard (Aureal/Vortex1), but that it is not supported. I've downloaded t...
Summary: I'm trying to get an external PCMCIA CD-ROM drive up to reinstall Win95 on this unit. Unfortunately, Dell does not have the DOS drivers on their Inter...
Summary: I also need a driver for my hp 710c. I can't print anything from a Dos-application. So someone who can help me to find a Dos driver is welkom. ...
Summary: Got an old laptop with not hot-swappable floppy/CD, so I need to know if it's possible to run Mandrake setup from DOS? Can't get Mandrake to detect CD...
Summary: On the DOS issue. If you use a command promt you can use your cd-rom in dos. To use a cd-rom in dos you can either install some dos drivers or if ya h...
Summary: i just enabled PCMCIA serices on my Winbook Laptop as detailed below. My new problem is that my mouse is IRQ 12. it worked fine until i enabled PCMC...
Summary: ive gotten a couple of emails about a post i placed in the os/2 forrum about how i have so many operating systems on my system and how to do it also o...
Summary: Por favor eu preciso do driver do motorola sm56 pci - speakmodem para o windows-xp, pois não consigo conectar a internet no windows devido o sistema o...
Summary: Does anyone know of a decent diagnostics or burn-in tool for / that boots Linux? Looking for something like CheckIt Pro for a Linux environment, or j...
Summary: It depends on the file type of the download. If it's a TGZ file, you'll need to extract it and look for a README with instructions. This may also re...
Summary: NTFS can't be mounted with DOS drivers, and the NTFS drivers aren't included with the normal RH 7.2 installation. You will have to get an NFTS module ...
Summary: Hi I am attempting to install Peanut off the bootable CD-Rom But my CD Drive won't boot any bootable Cds allthough BIOS says CD-Rom as the first boot ...
Summary: Here is an article about your specific card. Etherlink III, 3c509 / 3c509B Status: Supported, Driver Name: 3c509 This card is fairly inexpensive and ...
Summary: Get out your DOS drivers and run the setup utility that came with the NIC card. Find the base IO address, usually like 0x300 or something. Then in /...
Summary: If it's an ISA card, try using the ne2000 driver. You do need to know the port number, though. Do you still have the DOS driver disk? That will usu...
Summary: err I have to admit that I solved my little problem. if anyone's interested : I executed the DOS drivers setup program and I wrote down the I/O, IRQ a...
Summary: Unfortunately not. It's on an old Digital notebook, network is on an external module which doesn't have DOS drivers. I did manage to get RedHat to ins...
Summary: O.K. changed pin setting to cable like the hew packard chap told me to,so now I have a non graphical version of suse(bare version) 5.3 on my hard driv...
Summary: Your DOS drivers should have a program that will detect or set the IO port and IRQ. Linux detects better if you use the settings that are already pre...
Summary: I've got a Hinote Ultra II notebook (swappable CD-ROM/floppy). I've just managed to set it up so it boots from the HD into Mandrake 8 setup (CD not bo...
Summary: I have an asus a7v133 mobo with onboard sound. I found that the version (and most others I believe) dont support the onboard sound... luckily the asus...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
