Summary: eye knead a b00t disk for this old 486er, it's running some old version of dos, brobably 5? maybe 6 help me out? i only have like dos 7 stuff on my wi...
Summary: Since DOS can support all of these features, it's very easy to make such a boot disk with USB,LFN,NTFS,ZIP support, isn't it? In the past a few months...
Summary: i need to know how to make a boot disk for a print server the server is an old 386 with no hd they want it to work off a stiffy and it must have sup...
Summary: I have a couple of questions regarding DOS w/Windows 95 - Is it necessary (or possible) to create a DOS boot disk under Windows 95, or would the Win 9...
Summary: Can somebody tell me how I can create a boot disk for my workgroup 95/98. I have a laptop with de Grey Cell PCMCIA-card and I want to connect it to my...
Summary: I suggest a boot disk that loads the HD's drivers. If you have a USB storage thing on your keys/pen you can just use that; here's how. This is from an...
Summary: I've made boot disks for that exact purpose, but it took me a while and was a real pain to do. Try Mick C's web site: http://www.powerload.fsnet.co.u...
Summary: where do I get a boot disk for an old 286 upjohn grid laptop? when I power it on it just displays the following: Phoenix 80286 rom bios ver. 3.06 1-27...
Summary: You can create a "Basic" DOS boot disk from within Win98 or Win95. From the command prompt in Windows, type "Format a: /q /s". This will do a quick ...
Summary: I've posted the worlds greatest boot disk on my site (no its not ultimate boot disk) --- although it's intended for techs repairing computers, it can ...
Summary: I have a very old laptop, a Toshiba 1200H. When I turn the computer on it says boot disk failure type key to retry. But I can't type anything it just ...
Summary: Monkeyman, I have the same problem as Phil, I need a DOS network boot disk for a LNE100TX Fast EThernet card. Basically I want to be able to boot my m...
Summary: I added a driver which had been deleted for a CD-ROM on an old 386. Now it won't even get pass it in the boot up. Can some one help me find a way to ...
Summary: I have a empty computer (old one). It's totaly formated. Now I need a DOS Boot-Disk. I have DOS 1.0, but you cant reach C:\ with it. I have DOS 3.3, b...
Summary: First, make a regular DOS boot disk... Go to SysInternals site for NTFSDOS. Put the file on your boot floppy and just run the command NTFSDOS wheneve...
Summary: Okay, I don't mean to be another mooch, but I too need a DOS boot disk. I have built my own system from the ground up and have not been able to fo...
Summary: Hey I have tried formatting 1.44 MB floppy disks to 720KB, so i can create boot disks for my amstrad. I have covered up the second hole. I format it i...
Summary: I built a 486 and used most of my drives including hard drive from my old 386. The hard drive had DOS and Windows 3.1. I formatted the BIOS so the it ...
Summary: I'm trying to set up a dos boot disk to set up a menu and run a command for pre-format a Hard Disk Drive with GDisk. I know how to set up the menu loo...
Summary: I am in need of a Boot Disk for an IBM PS/2 Model 30 8530. The built in drive is only 720kb. The diagnostic disk runs fine but I have been unable to g...
Summary: I need to create a boot disk for a SCSI based Pentium machine so I can load Win 95 from the CDROM drive. I have tried the Win 98 boot disk but it do...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
