Summary: i am trying to speed up my comp and i read that if i enable dma on my hard drive it will do the trick.Problem is, when i try to i get a message tellin...
Summary: can i enable dma on my system? its a i440zx-w977ef motherboard the hard drive is a generic ide disk type 46 if any one can answer my question it would...
Summary: Do you mean you want to be able to write cd´s faster or do you want the cd´s you play in the drive to be faster? A writer can only burn as fast as it ...
Summary: I am about to upgrade to XP from ME. I have run a scan on Driver Detective which tells me that there are updates available for 37% of my drivers. I ...
Summary: I have a GeForce2 MX200 and it has TV Out I connect the cables to my VCR which is a couple years old. I go into Windows Media Player and set it to ful...
Summary: i cant enabled the tv out option on my geforce2 mx 400 driver options, it is automaticly disabled. also there is no recognition of this problem on nv...
Summary: can?t find IDE/AGP drivers for intel?s SE440BX2 motherboard. i don?t need them that much, only problem is that i can?t enable the DMA on the CD-ROM....
Summary: While attempting to install a new video card on my PC, I disabled the base video. Because of that I can no longer start my PC in safe mode. How can I...
Summary: mavis007 as i said in my original post the automatic fix from microsoft did not work..it said this fix is not relevant to your system...or something l...
Summary: Windows spontaneously shuts down & I get a bluescreen "A problem has been detected and Windows has been shut down to prevent damage to your computer. ...
Summary: Does anyone have the AIW radeon card as primary in a dual monitor setup? If so- and you are able to get the TV feature to work when the second monitor...
Summary: My Opti 82c931 card works in win9x OS that came with a driver which supports both Win9x and WinNT OS. But when tried with WinNT it displays the config...
Summary: Guys try this one out. It worked just fine on my machine. (PIII at 800MHz, 512 SDRAM, SBLive 5.1, WINXP Professional) Follow these steps..tried it jus...
Summary: Anyone have the software to enable scanning on the HP Laserjet 3300? On the website, only the print drivers are available, and they will not ship the...
Summary: Win 2000 automatically installs the driver for S3 Savage4. But inspite of installing DirectX 8.1 DirectX does not enable 3D acceleration. Can some one...
Summary: I loaded a DVD RW, On my sys, but there was too many compatability issues...I returned it, but I have sound problems..I reloaded the S /C drivers, and...
Summary: I need to develop a simulator of a device using vc++. the Simulator has to communicate with the device's driver. hw to eastablish communication b/w si...
Summary: I am very interested in Steves original CD. I need to enable the feature conector in order to use it with a VFx1 virtual reality headset, so I would n...
Summary: I have exactly the same problem, except the timing is not consistent. Sometimes the game runs for 10 minutes, sometimes for an hour. The PC is also ...
Summary: I have an iomega 16x10x40 CD-RW drive that my computer doesn't recognize and the usb root hub has a yellow exclamation point next to it. How can i so...
Summary: I am looking for a driver for S3 Savage 3D under win2000 which can operate (enable/disable) TVout or enable permanently. There is no such a driver on ...
Summary: I've had this driver issue for over 2 years and i finally sat down and want to fix it ok i have an asus A78nx deluxe board and an ATI Raedon 9600 128 ...
Summary: Look in your DirectX properties and see if hardware acceleration is available and enabled. To view the DirectX properties, run the program DXDiag. You...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
