Summary: I would like to set up several diskless workstations all booting win 95 from a windows 2000 professional computer. I believe you can use a "bootp" ser...
Summary: Please have a look at our web site http://www.qualystem.com Our LAN-PC software suite is aimed to remote boot diskless Windows stations off a LAN serv...
Summary: Hi, i want to boot my dump terminals using dhcp, i'm using Novell as a file server now, but i want remove it and want to use only 2003 as a file serv...
Summary: could anybody tell me, how i can boot a diskless pc, when it is connected via LAN (crossover) to a windowsXP-pc?? are there any good proggies or somet...
Summary: I BELIEVE, but am not sure, that the boot ROM chip you speak of is the chip that will enable the NIC to start a network boot, and boot a diskless work...
Summary: how do i connect diskless nodes(NODES) to a windows OS server machine and run windows on the nodes i.e is it possible to connect nodes to a machine wi...
Summary: Respected Sir/madam, We are the final year engineering students and having a problem that only you can solve it.we came to know about u from net.so pl...
Summary: possible? yes..practical? probably not. A windoze diskless environment? ooooh, scary thought. The simplest way to remote-boot a Windows client would ...
Summary: Can any 1 help me setup a diskless system I have 2 setup 1 server ie:PIII 1.2 GHz w 512MB DDR RAM & 9 Nos.TERMINALS without HDD I wanna know how do i ...
Summary: i've got a comp with win-98 in it and another p-166, which i want to use as a diskless node. both of them have network cards installed. but no bootrom...
Summary: Hi everyone I want to boot windows from a diskless machine. I have another machine running WinME on an ATHLON XP 1800 with 512MB RAM. Both machines...
Summary: I know I can't be the only one down this road. Same old scenario. Network boot disk to dump ghost image to shared drive. I am using a Windows 98 boot ...
Summary: I was wondering if anyone had any insight to an idea that I have. I recently had a hard drive die in my laptop. I dont want to spend the money to ge...
Summary: Hi... Was wondering if anyone knows how to create a network boot disk that automatically logs in a particular user for access to a network share. I'v...
Summary: I have two PC's and a NAS drive on my home network. About two weeks ago, I started running into this problem: Whichever machine is turned on first boo...
Summary: Hello, Is there any way to boot a floppy drive with USB in dos? I've tried to use the drive on my laptop with DOS 6.22 and even DosPrompt, but it won'...
Summary: I have an IBM PC with no CDRom. I have an NT4 network w/TCPIP. How do I create a boot up disk so that this PC will automatically boot and connect to a...
Summary: I have a diskless client that uses a virtual disk on another computer. For this thing to boot, there has to be a DHCP server somewhere on the network....
Summary: Hello, O.K, I'm not up on the networking side of things. I installed a Linksys Etherfast 10\100 Lan (LNE100TX-CA). Installed the driver from the CD t...
Summary: Hi guys, I've been searching these forums for an naswer ut none have been clear so far. How can i set up a windows Nt/2000/2k03 server to boot other c...
Summary: First, you'll need a network bootdisk (www.bootdisk.com) configured for your network. Then you need the CD-ROM, on whichever PC, shared. Boot with t...
Summary: I have an old compaq computer (deskpro 4000 I think). It can only boot from network right now, and I need to know how to do this. I have another compu...
Summary: Recently I reinstalled NIC drivers for a card in one of our laptops. Since then the laptop can no longer boot up or down when disconnected from the ne...
Summary: Hello, Situation: Failover target server has taken over IP address of source machine upon source's reboot (which it should). When source boots up I g...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
