Summary: I have noticed that my syslog is being filled up with entries similar to the following: Nov 17 17:11:07 nameserver dhcpd: if IN A computer.domain rrse...
Summary: I'm going to post the output. When i did the vi etc/modules.conf command. It was a blank screen with nothing on it. Why was it like that?? I did not p...
Summary: i just enabled PCMCIA serices on my Winbook Laptop as detailed below. My new problem is that my mouse is IRQ 12. it worked fine until i enabled PCMC...
Summary: No progress, ive send a helpmail to the osst mailing list where Kurt Garloff was friendly enough to tell me that its probably a low-level driver like ...
Summary: i read the previous forum "Subject: Install/Partition Problem" but the info is not enough for me to solve the problem. Help Needed. hi!i'm one of th...
Summary: do you mind reformatting your hard drive? If you don't then I'll suggest you re-format your whole hard drive using a linux boot up disk. Wipe out the ...
Summary: When I changed my CD-ROM drive on my Linux machine to a CD-RW and actually wanted to burn CDs, I modified it to be emulated as a SCSI drive, so I coul...
Summary: after I've build/rebuild my new 2.4.21 I've issue the command : /sbin/mkinitrd /boot/initrd-2.4.21.img 2.4.21 and it tells that all my loppback drives...
Summary: Hi there, after reading http://www.aaxnet.com/editor/edit029.html , which contained troubling information, some of which most Windows users know of, ...
Summary: hi all, i'm an Italian system administrator and i have bind 9.1.2 on linux red-hat 7.1. in my logs file there are some line with this message:----clie...
Summary: I have a dual boot machine set up. Already existing is Win2k and Mandriva Linux. I want to add Win XP Pro to the mix as a third boot option without d...
Summary: If the point of this is to learn more about Linux, I'd suggest Redhat over Mandrake because you have to do more to it to get to the level of polish th...
Summary: dude, this might help copy oakcdrom.sys to C:(from the WIN boot dsk) make a config.sys in C: device=c:\oakcdrom.sys /d:mscd001 make an autoexec....
Summary: Hello, I am writing a driver for a customer board we are developing. The PCI chip driver already exists and properly loads to allow for access to our...
Summary: Right, I am finding Crontab very confusing, and would greatly appreciatte any help with it. First, when I tried to run it (Crontab -e) it opened up i...
Summary: I have a Surecom ethernet adapter with the EP-320 X-S Ether Parfect Adapter diskete with the driver, I went to install this ethernet adapter in a PcCh...
Summary: If this is a question about automating a script that already exists by running it from another script, your best bet is to use expect. You can generat...
Summary: First you have to run ssh-keygen (eg ssh-keygen -t dsa -b 4096). This creates a couple of key files under ~/.ssh/ called something like identity an...
Summary: You don't mention specifically what program you are trying to use which makes you think your modem is not working. But, based upon what you've indica...
Summary: Sounds like you've lost your data and games and Linux had taken over all 18GB. In this situation I would use FDISK to remove the 18GB non-DOS partitio...
Summary: Hello I have webmin 0.92 on my mandrake machine. I try to upgrate it to the latest version using the RPM manager but all that happens when I install ...
Summary: minicom is a serail communication program, like hyperterminal under windoze. It allows you to directly talk to modems, com ports etc If it is a hardwa...
Summary: mount the cd # mount /dev/cdrom1 /mnt/cdrom1 (or copy the rpm you want to your harddisk) move to the directory of the rpm and type: rpm -Uvh riptide-*...
Summary: Yes, this should not require any special drivers. Simply do this at a command prompt: # ln -s /dev/hdc /dev/cdrom (replacing hdc with your CD-ROM's p...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
