Summary: What are device files...?? what are they used for?? and what are the differences between the two types CHARRCTER and BLOCK ?? Thank you !! ...
Summary: Hi! You have done everthing right except for one little tiny misstake. You can't mount a "raw" device (character device) since this device. You must u...
Summary: I am trying to mount my local PC File System on Salaris, So that I can accees my PC Files from Soalris. I tried mount - F pcfs /dev/dsk/c0t0d0p0:c /u...
Summary: 1) what command would you issue to check status of an NFS server? 2) what command would you issue to check the status of virtual memory? 3) what com...
Summary: Go to the /dev/rmt directory and remove any files related to the tape device. Next perform a reconfiguration reboot by 'reboot -- -r' or 'boot -r'. Af...
Summary: Hi! I've got to make sf 880 (Solaris 9) work with SAN connected HP EVA5000 storage & MSL6060 library. HBAs are FCA2257P and are redundant , so we use ...
Summary: If elx is the device, then elx0 would be the correct argument to provide to ifconfig. No such device or address sounds like there is no special device...
Summary: Hi all I have a problem getting a mount point to mount two devices? I know this can be done but am does anyone know how? please help in vfstab i h...
Summary: Hi , i also have a similar problem, but my error is: ok> probe-scsi Target 1 Unit 0 Disk IBM DDRS39130SUN9.0GS98E Target 6 Unit 0 Removable Read Only...
Summary: Sft: devices: i.e. "iostat -E" this will show disk,tape, cdrom devices with the instance names (prtconv |grep -v not) You can compare it with the /etc...
Summary: I have a system I can no longer boot. I raid the system for CPU/MEM boards when production systems have issues and I recently swapped board 0's. The p...
Summary: Hi Everyone first i would like to thanks to Orkun for helping me get started.I have just started learning unix and would like to install and configure...
Summary: hassan - here are the error messages and the output from some basic system commands that I found on the web. Thanks for your help. Boot device: /pci@...
Summary: tar tvf /dev/rmt0 or whatever your tape device name is should help. The third column will show the size of the files in bytes. Hope this is what you w...
Summary: When I reboot a solaris 2.6 machine. It stops at OK> prompt giving me the following message. Boot device:/sbus@3,0/SUNW,fas@3,8800000/sde0,0 File and...
Summary: Hi all, My question is on Disksuite 4.2.1/Solaris 8. The Disksuite installation creates a number of links under /dev/dsk/md and /dev/rdsk/md that all ...
Summary: I have just installed solaris 8 on a sun ultra 10. I have rebooted and it seems the box is trying to boot from the net device. it says boot device net...
Summary: Hi all, I attached a slave IDE to my SUN Ultra-5 computer, in order to copy all the master disk to the slave disk. I've created the same partitions, t...
Summary: Use is subject to license terms. WARNING: md d0: open error on (Unavailable) Cannot open mirrored root device, error 6 Cannot remount root on /pseudo/...
Summary: Hi, As usual, a solitary Sun box has reared its ugly head, and the only person who knew the root password left aeons ago... So, I tried following the ...
Summary: Hi I have one problem that when I type df -k it shows 90% utilization of root file system however I have nothing on root file system and to...
Summary: Dear ALL: I encounter a strange problem. when I have install solaris 8 on E450 system,system cannot auto boot, I must type boot disk at ok> prompt,fol...
Summary: I'm getting the following message when I try to install from CD1: FORCE,CPU-56 (UltraSPARC-IIe 650MHz), No Keyboard OpenBoot 4.0.5, 512 MB memory inst...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
