Summary: How can I defrag the memory in Win3.1? The problem is: the tool must be little and without installation! for instance: run from Access 2.0 in VB! Can ...
Summary: You won't get more RAM by deleting files. Only way to get more RAM is to add more modules of memory or replacing them. To defrag the hard drive you ha...
Summary: I've had Windows 3.1 roughly eight years, and two years ago, the paintbrush program stopped allowing the use of color, saying that there was not enoug...
Summary: Anybody ever used SoftRAM as a memory doubler? I know it's worthless for win95 but I seem to remember reading it might be useful for win 3.1....
Summary: I installed 3.1 and 3.11 over dos 6.22 and go to file manager and click on a drive and see the files i want to install, when i click on the exe or zi...
Summary: Hi jeff: Here are some things you can try first, try running c:/>scandisk to check you hard drive for bad sectors & files, then run c:/>defrag to clea...
Summary: I have a Kelly Micro Systems 4MB 88pin DRAM memory card. I am trying to install this card in my Acer 486dx2-50 laptop running win 3.1. I tried using c...
Summary: I tried to install extra memory (SIMM) on my old Compaq Deskpro 486/25, but when I restart, there's an error message " Base Memory Error 201"...Appare...
Summary: What is GDI memory (video display?) as oppose to user memory and is there a way to allocate more memory to GDI. I changed my monitor from vga to svga,...
Summary: I've tried several things and but I can't find a solution so here is my problem and I hope you can help me, I installed MS-DOS 6.22 and then windows 3...
Summary: Can I control the virtual memory settings in Win 3.1? (Which disk to put the swap file in, & the swap file size) How? I'm going to downgrade to Win 3....
Summary: Hi, I have 76MB of RAM on my computer but running DOS 6.22 and Windows 3.1. Is there a way to make DOS or Windows 3.1 to read all the 76MB since they...
Summary: I recently noticed a strange problem with my Windows 3.1 running on 386. I usually had about 2.4 megs free memory when not using any programs. Now I h...
Summary: Hello prasad, We are providing you some tips to increase your system performance. You can try this. Before you perform the below given tasks, please ...
Summary: Trying to regain some memory I must've deleted the wrong stuff? Gees!! PC now says it needs an 'XMS memory manager' to setup Win 3.1 again. I can't ...
Summary: I have 2 type 2 card slots. I have used one for a modem card and the other for a flash disk memory card. This works. However, when I remove the modem...
Summary: I am having problems installing Win3.1 on an old 386laptop. The extended memory is being read as 4meg. Yet when I install win3.1 I get as far as Disc2...
Summary: Is it possible to disable expanded memory in Win3.11? I need to do this to get my 386 laptop to work properly. If not, are there any Toshiba Maxtime u...
Summary: This is kinda dumb, but I need to find out how much memory is present on a computer running win for workgroups. Also, well you are at it... what are t...
Summary: It seems that the contacts between your memory and the slots are not good, take some hot soapy water and cleam them. best to do this while the power i...
Summary: I'm going to run memory maker to free up some memory exept i have some questions. i want memory to install more games. what type of memory do most gam...
Summary: Out of Memory Was just trying to fire up an old IE and get that OoM error, here's my old files, CONFIG.SYS DEVICE=C:\WINDOWS\HIMEM.SYS DEVICE=C:\DOS\...
Summary: Ok, lets get the facts striaght: Windows 3.1\3.11\Windows For Workgroups can map up to 64 MB of RAM. The mapping is done through through the DOS HIMEM...
Summary: When I turn my computer on "Driver memory error" comes up. If I click the message my computer shuts down. (windows 98). What is the problem? ...
Summary: Hi: i just have 8 MB of physical memory... how can i improve Ram memory of my computer??? if you have som tips of software (free) for me, i`ll be real...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
