Summary: Why is dual channel on socket A, a waste?yeah the default bios only supported up to 333 but i updated my bios and the fsb now goes past 200, goes to l...
Summary: Hello everybody, I'm going to upgrade my computer pretty soon, and while looking for some DDR, I came across Wintec AMP-X DDR memory. I haven't found ...
Summary: "The power supply is brand new, so its not the problem" If it's a cheap piece of crap, it may very well be the problem! What brand is it, how many wat...
Summary: "Bios setting is set to default" There's one problem right there. Default settings are used to get your system up & running, or they're used as a fall...
Summary: Quick question if CPU FSB is 200Mhz then will running PC133 cause the FSB to run at 133 ? Q-TEC 550 Watt PSU MSI VIA KT4AV-L 2800+ Barton 512 DDR333 G...
Summary: Hey guys. I bought 1gig (2x512mb) pc3200 RAM I also have a AMD Barton 2800 (333fsb)- the multiplier is locked at 12.5x I seem to be having problems ov...
Summary: Hi, a small question, i've bought a nice p4 2.66mhz pc with a frontside bus of 533mhz, and 1x 512DDR266 module, now, i don't realy like the DDR266 mo...
Summary: How this memory stack up against other brand memory? It is strange that ther is no review of this memory (Infineon is not no-name)! Is this memory wor...
Summary: well..i have a chip of 256 Mb ddr333 Kingston too. i tried to overclock to 348 Mhz but the computer reboot randomly after a time so now i turn out to ...
Summary: Similair setup to me there matey, i run a 550 watt PSU 16 Amps on the 12+ Volt rail Q-TEC 550 Watt PSU MSI VIA KT4AV-L 2800+ Barton 512 DDR333 GeForce...
Summary: ok guys, well for some reason my speakers make a buzzing noise, whenever i put my hand near the speaker with the power and volume on it the noise grow...
Summary: Did anybody try to install a TBIRD 1400 / 200 FSB on a ABIT KT7 (without "A") (with the latest BIOS, of course)? ABIT mentions something on their BIOS...
Summary: A few people with Barton CPU's have simply just set their multipliers to 11 and their FSB to 200, this will give you a 3200+, many simply use the stoc...
Summary: Well. FINALLY, I got my new pc yesterday. After a clean install, and configing for an hour or so, it is all running nicely. I thought I would test out...
Summary: "If your not careful you could cause internal cluster cauldronization of the microscopic transistors inside the die of the processor, not cheap" Damn!...
Summary: A newbie question. I built my first pc a while ago, frankly, I didn't know what I was doing! Anyway, mobo: Gigabyte GA-7VAX (supports 333FSB/DDR333) C...
Summary: I've got a ABIT BD7II mobo that support DDR266 only, I've got 256Mb DDR333 and a Celeron 2.0Ghz I OC the FSB to 580Mhz (4x145) so now my Hell-eron now...
Summary: This is my first shot at oc'ing so I have a couple of questions. I'm using a xp2400 w/ 1g(2x512)ddr333 on a epox mobo. changing the multiplier is not ...
Summary: Your proccessor is 200FSB and your Ram is 133FSB so the correct setting would be 100/133, However this setting on this board does not work that well. ...
Summary: Just wanting to know my limitations of my ram and cpu.I have a MSI K7N2G-L with up to date bios(can go farther than 200fsb).Im pretty sure my barton i...
Summary: I have an ABit KT7 motherboard (not the -A version) which operates at 100/200mhz fsb. I currently have a 800mhz t-bird processor. The maximum proces...
Summary: how old is the chip? is it "burnt in" yet? can your memory handle the o/c? being a cheap ass i buy cheap memory- but always faster than my clock speed...
Summary: Dude, you've been posting an awful lot lately...the FSB issue is one of those fundamental things that you should have learned by now. AMD double-pumps...
Summary: AMD "double pumps" the FSB on a socket A system. With DDR-SDRAM, the rates are doubled as well. Your settings are correct. 100MHz = 200FSB & DDR200 (P...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
