Summary: my buddy is working on fixing a cusom built pc and is having a bit of a problem. it's got a new mobo and a new processor but it wont boot. everything ...
Summary: This is not a big deal but every once inawhile my pc wont boot the first time; so I restart again and its boots fine. Any suggestions to solve this pr...
Summary: Thanks for your help Hooner, I managed to reset the CMOS. Any ideas why I cant get this CPU running at 133GHz. I tried setting the External; Freq. to ...
Summary: Hello, i have a custom built pc. its using Gigabyte 7vrx motherboard and has AMD 2100+ installed plust 4 cooling fans. MY PC WONT POWER ON. When i t...
Summary: Hi, i recently decided upgrade my 600 mhz celeron processor to a 1.2 celeron, but after having installed it, the pc doesnt boot up. the monitor just f...
Summary: Hola.. Pc wont boot, motherboard led comes on, keyboard lights flash, fan starts, can hear HDs start spinning, but nothing on screen, not even BIOS, n...
Summary: yo , im having a problem , the pc was booting up before , but now it wont , i was installing a new heatsink - thermaltake volcano 12 , checked everyth...
Summary: intel e8400 overclocking. will i need a special mobo to get this to around 4.00Ghz + on air cooling then eventually put it on water cooling. also will...
Summary: i want to overclock and e5300 dual core intel with arctic coling frezer extreme, what motherboard would you reccomend? Samsung 32" HDTV Logitech DiNo...
Summary: im trying to set my FSB to 166 for my 2800+(which is optimal speed). right now it will only boot up when jumpers are set to 100 mhz. the manual call...
Summary: Ok, after just formatting we had alot of problems reinstalling Windows XP, because the disk we was using to recognise the Serial ATA drive....was a b!...
Summary: I have an Athlon 1800+ XP Processor. This should run at 1.533 MHZ. When My computer boots it shows me 1150 (1.15 Proc). Doing research I see that I n...
Summary: hello, I have a amd xp 2000 cpu. when i set the clock speed to 1.66Ghz it wont boot up to windows. but when i set it lower (1.24Ghz)it boots up fine t...
Summary: Hello, This morning I found my PC cannot boot. Last night it was ok, got no problem until when I tried to turn it on today. It doesn't sound "beep" li...
Summary: i have a computer im trying to build and wont post a thing on my monitor after all the reconnections and thinking, and reading instructions.. and i ju...
Summary: My pc was overheating so i open up the case a hoovered up the dust.. i went to remove the heatsink to get rid of the dust in the plates. however it p...
Summary: When the computer is cold wont boot up first time get message windows needs to start normally, I have a gf4 440 mx card works very well once booted up...
Summary: I have a k7s5a and a 1.2 athlon. When running at 100/100 it works fine, but the speed is only 900 mhz. When i switch to 133/133 it goes to 1.2 but wi...
Summary: I currently run a p2 233MHz on an abit be6 motherboard. I've changed to a p3 500 MHz but the system wont boot up anymore. Can anyone help please? ...
Summary: I just got my comuter, an athlon xp 2500 and i was messing with the cpu settings in bios. I icreased the fsb from 100 to 166 the computer is locked so...
Summary: This thing just seems dead. Dosent start at all. It was working fine and suddenly the system froze. I tried to restart and since then it just wont boo...
Summary: I bought a custom built computer with this processor. First off i was wondering how does this processor stack up to lets say a pentium d 3 ghz compute...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
