Summary: I configed raid 0 with 2 hdd and installed Novell 4.11, i want to add 3 hdd to a original logical disk.How can i create novell partition and create v...
Summary: I have a novell box with two 80 gig drives. I am trying to partition them in this fashion Disk 1 dos - 200mb sys - 8gb Vol_Whse - ~70gb Disk 2 Vol_R...
Summary: Thank You all for help. That's what I've done : Originally Server had 1 sys volume broken onto few segments sitting on 2 ISA HDDs. 1).I created Novell...
Summary: create a DOS 6.22, 200 - 500mb partition, marked active to boot. format with system, no memory management..ie himem.sys. install DOS cd rom drivers....
Summary: After you mount the Hard Drive in the Server, you boot up and load install, then creat partition and mirror the hard drives, its all simple and easy t...
Summary: In last time, when we have a server with Novell 4.11 or 4.2 we mount a disk of 1 Gb. I load MS-DOS as OS start in a little partition (150 Mb). And the...
Summary: hi, weve backup thru a novell 3X server attached was a HP magneto optical drive attached, The drive is broken, ive brought in a new one, hooked it to...
Summary: How can i install Novell 4.11 on 40 GB HDD, I have created 500MB dos partition and tried installing novell but while creating partition it only shows ...
Summary: You could try removing the harddrive with Netware 5 and put the original 4.1 boot drive in. You just may not be able to see the 4.1 partitions right ...
Summary: Novell doesn't have a limit that would keep you from seeing all the space. Maybe try a newer driver. Can you be more specific? Once you load the drive...
Summary: My Novell 4.10 server can't create a partition larger than 8 gig, even though i have two 15 gig hard drives it wont do more than 8 gigs each. I have a...
Summary: Hi I had installed 4.3 GB on my system and I want to install Novell 3.12 I had created a Boot partion of 600 MB and then started to install the Novel...
Summary: Hello ! I have a Novell Netware 4.10 server. System disk was mirroring. Backup disk (secondary disk) has a Dos partition but when i mirror the system ...
Summary: Hi all, 1.My novell 4.11 have problems with arcserve. I have read a lot in this forum about look the service pack first. Can u tell me where can i fou...
Summary: Hello, I have attached a storage device to my Novell 5.1 sp6 server. i already have another storage device attached same make and model. In NWCONFIG i...
Summary: Dear All,, I have a Novell netware 4.11 server boots and prompts for :- IPX internel network number: C0A801 Which i gave as :- C0A801 Server Name as...
Summary: we've got a novel server that has crashed. we need the data on the hard but when I connect the hard to a system with windows xp it doesn't show the pa...
Summary: That configuration will work fine(I have the same setup at home on a test network). Running SCSI drives as follows, Drv1=C:Dos fat16 with Win95 and Nw...
Summary: Don't create any partitions on the drive other than the DOS partition, leave the rest of the drive blank. NetWare needs empty - non-partitioned space ...
Summary: I hope someone can help me with my installation problems. I'm taking a novell class & could use some practice at home. I have an old 1.6 GB hard drive...
Summary: Go to download.com and search for a tool called Ranish Partition Manager. It's free and not too bad in use. With this you can delete the Novell Partit...
Summary: You definatly do NOT want to run himem.sys. You will see so many problems. Start over completely. Fdisk and get rid of all of your partitions and t...
Summary: Netware Server can be installed on a blank Hard Drive or on a drive that already has a disk operating system and data in place. To install on a blank ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
