Summary: I ordered a stack of 8 ips public for my network. I have a Netopia and a linksys. I have assigned some of my static ips to vpn workstations using th...
Summary: Hello, we have a problem like this: a linux firewall is connected to a cisco catalyst. We have a 10.x.x.x private network and the public address (st...
Summary: heropsycho2177, My WAN IP is static. I understand the basics, and understand most of the stuff you said, but I don’t always communicate everything c...
Summary: does anyone here ever use radmin? its like pc anywhere i guest. it uses port 4899. I can get it to work on office net, but when I tried to connect t...
Summary: Yep, That's exactly what I did. I have maid a bckp and reset to factory, even update the firmware but stil, router in -> no connection. I have Tried w...
Summary: Here's your options: Wireless bridge - this is two devices setup wirelessly to exchange data. Shortcoming are limited range [not even a mile] or phys...
Summary: Hi, I'm trying to connect across the internet using remote Administrator to a couple of PC's connected to the internet via a Linksys WAG54g Wireless g...
Summary: you need private and public private adresses are hidden from the internet. so anything form the internet cant connect to a private adress. public ain...
Summary: Hi guys ok am just about to throw the towel in with this one! what seems so simple is not. I have three new laptops,im trying to set up a dead simple ...
Summary: It assigns the static public address to Computer1 (99.70.xxx.xxx) You seem to be getting confused between static IP addresses and dynamic IP address a...
Summary: heres whats going on ______________ tech guy Are you forwarding port 80 from your firewall to your web server? me i opened all ports from my firewal...
Summary: Okay here is the deal. I currently have both my computers running windows 2000 and we share the cable modem fine using a hub that is connected to the ...
Summary: "You guys are confusing me." Sorry, Lisa. I should have quit after my Response Number 1 because I do not know Windows ME and I don't know what your ne...
Summary: Depends entirely how the network is setup. The term Public Network is a bit misleading in this context. It may be a network that the public have acce...
Summary: Hi, wonder if anyne can help? I'm running a LinkSys WRT54g router off of 192.168.2.1 and a LinkSys ADSL modem (ADSL2MUE) off of 192.168.1.1 both confi...
Summary: OK, I installed Samba on my RedHat 7.2 box, configured it, and everything seems to be running smoothly. I have run through all the checks on this page...
Summary: hello this may make you think twice about wlan (wireless lan)and make sure you dont use default pass words ect. have a nice read. ******************...
Summary: Thanks for that, have managed to get the bridge in place, the desktop with ME on it can then access files and the net, but then the laptop cannot. Hav...
Summary: >> How does the ISP then get http responses back to the client. The server serving the web page cant send it to the private IP address. It has to send...
Summary: We have two office locations, Main office with W2K server (and 20 ME machines) and remote office with a peer to peer network (one W2K Pro machine, 8 M...
Summary: http://support.microsoft.com/default.aspx?scid=kb;en-us;304040 SUMMARY With Microsoft Windows XP, you can share files and documents with other users ...
Summary: Thanks for the reply. The public network is already based around a BB router. I was not intending to use the first PC as a bridge (since it may not a...
Summary: I'm not sure about UK broadband, or AOL for that matter but you should be able to set up a port forward on your firewall for your game. You'll need to...
Summary: What Operating System do you and your friend have? Do you have firewall software enabled? If you disable it, perhaps you could try a VPN (Virtual Priv...