Summary: 1790 is a BIOS error. Your BIOS backup battery has probably died and the info about the drives has been lost. When you power the laptop up, it can't...
Summary: My computer was give to me and I changed the date and year.when I did this and turned it off it blew it's mind.I changed the date to jan.18,2001.It wa...
Summary: Ok, first, reconnect everything as it was before (if it was working then). Then try a boot disk with CD-ROM support. You don't say much about your sys...
Summary: Hi, my Toshiba T1950CT laptop won't reconize my modem which is a Megahertz PCMCIA 2.0 XJACK Data/Fax Modem model #XJ1144. My laptop is running Windows...
Summary: I'm currently trying to get Windows 3.11 on my network. I'm using a D-Link DFE-530TX+ ethernet card, which came with drivers for WfW 3.11, and DOS. (T...
Summary: I got a Toshiba T1950CT that is running Windows For Workgroups 3.11. My modem is Megahertz XJ1144. I don't know how to get my machine to reconize it. ...
Summary: Can someone please help me......I had my computer re-formatted,I didn't have the cd disks or floppy available at the time to get my drivers installed ...
Summary: You might try www.norman.com ; they bought ThunderByte, which is the AV we used all the time on w3.1x, WFW and DOS. BTW your config.sys won't do anyth...
Summary: I'm having problems booting Win 3.1, after the BIOS screen it won't do anything, and the floppy disk light stays on. Can't boot to DOS either, Please ...
Summary: I have the same problem, my floppy light stays on, but I checked the wiring, and it on right. After the BIOS screen, it won't do anything, DOS won't b...
Summary: Help!!! everytime I click something an error message pops up on the screen, I am happy to say I got the computer running again, I've been working on i...
Summary: I have Win3.1 running the way I want it to, but can't get online with it. I installed a modem, but the dialer doesn't read it. I used the "Terminal"...
Summary: My daugheters computer won't do anything at all. It always say syntax error. Then it says incert the correct disk and press any key. Where do I go ...
Summary: Hi jboy, thanks for your reply. How do I tell if it's a IDE drive? I've checked all the connections (don't really know what I'm doing) and there's n...
Summary: I only have experiences with Virtual PC (I downloaded bochs but VirtualPC seemed faster, better sound and emulates a better graphics card), and never ...
Summary: I have an old computer that I stored a little data in, to keep clutter off the new. It has been quite awhile since I used it. Now, I tried to boot i...
Summary: I'm trying to "add" an Apex T-1000 printer by Epson; the control panel interface keeps saying "epson9.drv is not a valid printer driver" and won't let...
Summary: Hi Dave: You might have a bad install, or it's bad software. I never like to use other mouse install drivers, they seam to give lots of problems when ...
Summary: So type 40 won't work and setting C,H,S doesn't work either? Try setting, Cyl 723 - Head 13 - Precomp 65535 - LandZ 722 - Sector 51 if the Dell bios...
Summary: Made 2 floppies for DCC but host says turn on the guest laptop. Its on, A: drive and booted on both PC's. Have parellel cable between win95 host and l...
Summary: I recently purchsed a USR 14.4 modem for me to use in my rather old Packard Bell Multimedia computer. It's a 486 - 33Mhz and is runnign netscape 3.04...
Summary: Vicki, reboot with your Win98 bootdisk. Choose the option to "Start my computer without CD-ROM support." At the A:\> prompt type: Format C: (ENTER) If...
Summary: I recently purchsed a USR 14.4 modem for me to use in my rather old Packard Bell Multimedia computer. It's a 486 - 33Mhz and is runnign netscape 3.04...
Summary: Due to a little mishap I have had to reconfigure my system (Win3.1 on a Pentium90). Now my soundcard won't install (ExpertMedia MED3240/41).I get a m...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
