Summary: au demarrage,je reçois l'erreur:CMOS SETTING WRONG.En entrant au setup par F1,je trouve la date et la vitesse du CPU modifiées.Apres changement de la ...
Summary: I just built a ECS L7S7A2 with an AMD 1.73 GHz cpu, with 256 MB corsair RAM ... it will not boot, I don't think it recognizes the keyboard! It says CM...
Summary: The first pc I ever bought is the slot1 AMIBIOS i440 ex/lx chipset sis 6326 onboard agp ok ive been swapping parts in and out of this thing for a few ...
Summary: I am facing very strange problem, some times when i switch on my CPU it does nt turn On, then i use to remove its BIOS cell for 2 minutes and then put...
Summary: I got a computer just to tinker with from a friend who couldn't get it to start, and she isn't extremely computer literate. I used the jumper on the m...
Summary: I am getting ready to build my computer and I have selected the DFI LANParty nF4 Ultra-D mobo. I am getting disturbing information on the Internet th...
Summary: Hello, Im looking for the command for a Phoenix A486 startup command that will show the CMOS setting, Shift + F1 and Ctrl+Shift+Escape are not working...
Summary: Hi Just got a new pc. Whenever the pc has been without power for over pc, it boots up with CMOS SETTINGS WRONG. i set the cmos up again and everything...
Summary: Hi there! I recently had the problem, that my cmos settings were lost. When I changed the settings again, everything was ok for a while. After two wee...
Summary: I recently built a PC: on the BIOS screen I am being shown two messages: 'CMOS settings wrong' and 'CMOS memory size wrong'. Also I think because of t...
Summary: Thanks alot Another thing is after my computer was screwing up and randomly resetting itself, it actually said CMOS settings wrong. I never changed an...
Summary: Hi, I was wondering if there are any commands for the command prompt to bring up the cmos settings. When I try the key configuration at start-up it sa...
Summary: This may seem a bit complicted to some & silly to some. But i will still go ahead and ask it. I have a i810 mother board. The problem with it was til...
Summary: Hi, I really need your help, please help me. I just bought a ECS K7S5A Pro Motherboard and AMD Athlon XP 2400+ CPU ... everything works fine, I even c...
Summary: I have an AMD athlon set-up, 300 watt power supply, "ECS K7S5A" motherboard, 120gb hdd. I had the computer on the other day and a freak storm came up ...
Summary: I have even more problems again today. I posted the different issues on the main/general hard ware page. It just doesn't seem to want to work. I ge...
Summary: This may seem a bit complicted to some & silly to some. But i will still go ahead and ask it. I have a i810 mother board. The problem with it was til...
Summary: Recently my Emachines 400idx just would not turn back on. A friend suggested I replace the power supply, and upon installation and start up I came acr...
Summary: Hey, I'm hoping someone here can give me some insight on my problem. Before I start, here's a rundown of the system: OS: WinXP Home SP2 CPU: AMD At...
Summary: Hello, My system is under 2 months old. I hardly ever shut it down however, from time to time when I do, I get an error stating that my cmos setting...
Summary: I'm helping a friend to fix his system. The cmos needed to be reset and I cannot get the cdrom to work. It's an older system (p 100) and while it ha...
Summary: cmos settings are specific to your particular computer. Basically, you need to specify information about the hardware components in your system. Opti...
Summary: ok i have a simalar problem mb-matsonic ms9158e cpu-p4 2.8ghz ram-768mb ddr hd/master-20gb maxtor quantum fireball hd/slave-250gb maxtor diamondmax 2...
Summary: Hi, question; how to clear CMOS and reset it to manufacturer default setting? by then it will not cause the system not work? please help.thanks alot. ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
