Summary: you cant change the mac address, it a unique address given to the network card makers how give it the address, there are no duplicate mac addresses in...
Summary: I think it could be managed by Software. Becuase I can change the MAC address in Netware Client, But I don't know how to change it on WIndows NT. If y...
Summary: I would like to know how to find a where a MAC address is on my network. There are about 1800 computers and I need to find out where a MAC adderess is...
Summary: Does anybody know how I could get hold of the MAC address of my NIC. I would like to have some sort of Hardware-set ID for the machines in my network....
Summary: OK, It's sorta like the individual serial number found on P3's. The only difference is that it is found inside the chip inside an NIC. There are sev...
Summary: I've gone through many of the posts on this subject and have tried everything that has been suggested without any success. I have 2 DHCP servers set u...
Summary: firstly disconnect the jet box from the lan but have it attached to the printer. assuming it has a button or plastic 'something' to press then press i...
Summary: Hi, I have a realtek RTL8029 network adapter. I cannot find the MAC address. There is a number on the NIC 5200pxa379b1814152. I do not think this is w...
Summary: Running NT/2000 boxes on an internal DHCP-based network. I need a way to uniquely identify any workstation upon login to a webserver or portal. I th...
Summary: We have some problems on our network, I found with the programm sniffer that there is IPX on the network. How can I resolve a MAC address to it's IP a...
Summary: I have Win NT 4.0 SP6a and a Realtek 8029 pci ethernet adapter. Yesterday the mac address of this adapter became 00:00:00:00:00:00 How is possible ? ...
Summary: The piece of equipment that has this MAC address in manufactured by MICROFIRST INC, a company that would appear from their web site (http://www.microf...
Summary: Good day. I'm searching for a way to change the IP address of my Winnt 4 server from the command line. If I had more info, I could get one of our prog...
Summary: OK, first of all let's rehash the scenario. The only way for two nics to work is if you're splitting one medium size network into two or more segments...
Summary: Hi out there I've changed the entries for the dhcp in the registry with Visual Basic. Now I get allways the failure "Unable to read the configured IP...
Summary: Hello, I have a network mainly run by novell but we have 1 NT server that has dhcp set up on it for one site's subnet. The other site is using a Nove...
Summary: I have an NT Server set with an IP address in a given range, and have an external DNS server box providing workstations the IP address of the server...
Summary: Go to the command line. Type ipconfig /all | more Hit enter. You should see several blocks of information. You may need to hit enter once or twice to...
Summary: Hi, I want to create a larger subnet by migrating a network 192.168.6.0 mask 255.255.255.0 to a network 192.168.6.0 mask 255.255.254.0. I am using NT4...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
