Summary: Hello, I really need help.. I tried to install my cd-rom by copying oakcd.sys from a boot disk, in c:\ then i put a line in autoecex.bat C:\WINDOWS\M...
Summary: H-P DLA CD-Rom driver I am using the H-P DLA driver in Win 98 for formatting a CD-RW and CD-R disks. Haven't ever had a need to use this software befo...
Summary: I think that the 1750 has three CD-ROM interfaces on it-Panasonic, Mitsumi and Sony. Your CDU-33a usess the SONY. Make sure that jumper near the inter...
Summary: I have tried out what you suggested. It boots up from the disk however it says there has been no drivers found for the CD ROM drive and therefore abo...
Summary: I have decided to make the jump from 3.1 to 95 but I am having trouble getting my computer to see my cd-rom. I have the 95/98 boot disk and I assumed...
Summary: i have a cd rom driver that i am trying to install on windows 3.1. the computer is a HP vectra VL series 4 5/133. i install the driver and it does it...
Summary: I have a spare computer, packard bell "legend 34cd" that had win 3.1 and crashed. I bought from e-bay win 95 and a boot disc. When I try to install ...
Summary: Win 3.1 / 3.11 CD-ROM drivers are generally the DOS drivers for a particular CD-ROM. After you get the make and model number off of your CD-ROM drive,...
Summary: Im trying to install my cd rom driver onto dos 5.0 using downloads from the net. Its not working very well. My Config.sys and autoexec.bat look to be...
Summary: HI, thanks for you time, i just want to ask you for cd-rom driver is gone. Can you please send me a copy or boot disk because a lost my. i hav...
Summary: I have a new laptop and im trying to put win 3.11 and dos on to a partition of it. Will i be able to find cd rom drivers that will work on the old sys...
Summary: I could be wrong but I don't think Packard Bell actually made their own CD-ROM drives. If you open the computer and pull the CD-ROM drive out and look...
Summary: Help!!! I have an old Matsushita-Kotobuki CD-ROM Model CR-262-B. I need the drivers for Win 3.11. This is for a friends Father. Can anyone help ??...
Summary: could somebody please direct me to site that would have the drivers I need for cd rom, and modems that operate in windows 3.1 PLEASE HELP! ...
Summary: The driver needed is for a MATSUSITA-KOTOBUKI (COMPACT)-disk brand of cd-rom.Model#:cr-562-b,manufactured (1993) in Japan by:Matsusita Kotobuki Electr...
Summary: Come on Guys - All this talk about CD-ROM Drives is all very well! But have we all forgoten that Modems under MS-DOS & Windows 3.1 DO NOT NEED DRIVERS...
Summary: I have a compaq xe 450 with an acer 32x cd-rom drive and win 3.1 doesn't reconize it. I need the win 3.1 driver. Does anyone know where I can find i...
Summary: Thanks everyone for all the responses and important information, it was incredibly usefull to me. I have opened up the computer ( which was quite the ...
Summary: I installed Windows 3.11 for Workgroups. I need to install a CD-ROM drive. The CD-ROM model is a SANYO CRD-1332P. Would a Windows 95/98 driver work on...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
