Summary: Yes, I installed the software to it on the computer. I made sure I followed the manual and all to get it right since I'm not familiar with digital c...
Summary: Hi, I have a new hard drive, which I installed under Win 98 SE. The drive worked ok, and I copied data to it. I recently formatted my original hard dr...
Summary: I am having problems with a Maxtor 250gb hard drive. I had it connected to the RAID and have had no problems since i bought it 8 months ago. I keep ...
Summary: Since you can't access the drive even on a desktop machine, you're pretty much finished. Data can be accessed sometimes, but it's very expensive to ha...
Summary: Hello everyone! Okay, so to get my HDTV working with my computer I had to get another regular CRT monitor first and then set the nVidia options to use...
Summary: I recently Formatted my Primary drive and re-installed Windows after doing so, I can't access my Slave hardrive anymore, it keeps saying that my sla...
Summary: Sister's got a Samsung 350s digital camera and has lost the owner's manual and I can't find the manual for it anywhere on the 'Net as of yet. Anyway t...
Summary: Whenever I plug a device (a PDA, a media player, a camera, etc) into a USB drive on my computer, it seems to work alright. My computer detects it, etc...
Summary: Hey, I tried to transfer files from my home computer (WinXP) to my office one (Win2000) using a USB memory stick. However, when I plug it into my offi...
Summary: I have an OnSpecInc. brand of Flash Media Drive that has ports for CompactFlash, Memory Stick, MMC & SD, and SmartMedia as well as a floppy installed ...
Summary: Here's the whole story: I tried to install on my almost-new Dell Precision Windows XP laptop, but was unsuccessful - as follows: Attempted to install ...
Summary: The mboard bios must recognize the hard drive. If it doesn't Setup cannot find the hard drive. If your mboard is older than about 2001 or so, it's bi...
Summary: I have a seagate HD where i have "windows xp" installed that isn't working properly due to shock however i can still turn it on but it only shows up a...
Summary: I recently did a new build with a new hd, new copies of XP, etc. Once everything was up and running, I installed my old HD (that still has windows in...
Summary: The master is a ide 'hitachi darkstar 82gb hds728080plat20 http://www.hitachigst.com/hdd/suppo... Yes i did think that the master might not be jumper...
Summary: Please help me. I just assembled new computer with the following components: AMD Athalon XP 2400 Antec case w/430w power supply ATI radeon 9700 pro ...
Summary: I'm trying to help a friend out and see if I can stop some probs on his computer so I got some installs and some updates and put them on my little 8GB...
Summary: After asking this question in the Dos Forum I was told to try this forum. I've got a new Maxtor Fireball 3 hard drive that was a warranty replacement....
Summary: Hello everyone, Here's my problem.... THe PS/2 port on my pc is broken, so I went to buy a USB keyboard...but... Now when I boot up the system (in Win...
Summary: hi all, i got no where else to look and i REALLY need help! I just upgraded my home computer. I put in a geforce 2 mx400 64meg pci card and a new hard...
Summary: Hello, I have this Sandisk Cruzer Micro USB 2.0 storage key; never needed any drivers on either Win98SE or OSX, everything worked fine on both platfor...
Summary: On small cases, the drive bay interferes (sp?)with the heatsink. Usually you can take the drive above it out and then install them in reverse order as...
Summary: I have a Kodak DX3500 Digital Camera its about 2 years old.The camera used to work fine on my computer now I cannot get my computer to reconize the ca...
Summary: my compaq is f10 too. the little square must mean the cursor that shows up for a brief second. note, you can't access a compaq bios if you don't have...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
