Summary: I am trying to make bootable an old pentium. Theres no partition, A: drive is accessable but the CD-ROm drive is not. I need dos CD-ROM drivers so tha...
Summary: HI, I've got a problem where my system is not recognising the fact that the CD rom drive is attached to the computer. When I try to install a generic ...
Summary: You say you get C:\> when you boot? Do a DIR on C:. Is there a \CDROM directroy on c:? If there is enter CD \CDROM and then enter DIR. Is the...
Summary: You have some kind of boot floppy? If you do boot and enter SYS C:. Then boot to C: and install the cd rom driver in a directory. If you have ...
Summary: The RAM disk is normal. The ME boot disk extracts the CD-ROM drivers into a RAM disk and it creates it at the next available drive which is C:\. I a...
Summary: I tried this just for fun a few days ago and the whole procedure is quite simple, although Nero might be quite confusing at first. Naturally, you need...
Summary: Place a disk into the Cd Rom Drive (F Drive) The light flickers for about 1 to 2 mins and then goes out. The disk drive does not Auto run or does it r...
Summary: To make this short, I tried to reformat computer #1 and re-load Win98, but DOS does not access CD-Rom. I pulled hard drive and CD-Rom out of computer...
Summary: Hello, Okay I am really stuck. I have an IBM Aptiva and I reformatted yesterday, that went fine. Now I am stuck in DOS because it tells me there is a ...
Summary: {the old post did not help bu thanks}I just put this computer together. it is an pentium 200 mmx with 64 mgs of 72.pin EDO memory. I have 2 hard driv...
Summary: I was given a system with Win XP on it and I want to remove it and install Win 98 as the system is NOT compatible with XP for various hardware support...
Summary: ok- heres the deal... i have an old compaq model 4/50(486 dx2 50mhz). I want to put a cd-rom on it, i have installed the cd-rom. The thing is, in the ...
Summary: Jeez! All I did was ask a simple question! This hard drive was completely erased when the guy brought it to me. Since the computer was still runn...
Summary: I just put this computer together. it is an pentium 200 mmx with 64 mgs of 72.pin EDO memory. I have 2 hard drives C has 1.6 gig and D has 800 mg. I h...
Summary: I reformatted both my c & d drives. My cd-rom is not detected and I need to install win 95 from the cd. How can I get the cd-rom running again so i ...
Summary: I have a ATAPI 44x cdrom. I had to wipe out my hard drive and start over. When I use mt win98 start disk and choose with cdrom support, it give me err...
Summary: I can only agree to response #2: I have an old Soundblaster CD-ROM (2x), which I could not get working using any ATAPI driver I could find. Then someo...
Summary: Try and run APAPI.EXE - I think you will find that it is an install program to extract CD-RON SYS file from! Failing that, I have a Universal CD-ROM D...
Summary: True. DOS 6.22 does not read CD-ROM. And if no physical second diskette drive, then B: becomes the alternate way to access the A: drive as a different...
Summary: My father in-law gave me his Laptop, 650 Mhz. it has 1 slot were you can put your cd rom or your floppy drive. everytime I put in the win98 boot dis...
Summary: I do not have the disk for the cd rom. this computer was given to me. I am a new, learning it person. still in training. the cd rom is a 1994 matsus--...
Summary: jubalsams - This may be a Dos area, but the problem seems to be the bios (not booting CD) rather than dos. I haven't a clue what the 'superboot' flop...
Summary: I have an old Acer 486/DX at 33 MHZ, It has 2 floppy drives and one cdrom drive. I need to get the CD-ROM to work so I can update it to Windows 95. Th...
Summary: If you still have the disks that your CD-ROM drive came with, try re-installing the drivers, or you could get some undelete program like Norton Utilit...
Summary: just curious if anyone has any info on this situation: the institute i work for does a lot of cloning (over the network) of machines that come in for ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
