Summary: I'm using rhn. Today it gave me this message: "RPM package conflict error. The message was: Test install failed because of package conflicts: install...
Summary: I have a 40gb hardrive and i have a 20gb windows 2k partition on it. The boot partition is suppose to be on the first 1024 cylinders and what if I pla...
Summary: /boot Boot partition > 1024 cylinders This is the error message displayed when I creat a /boot partition while installing Red Hat Linux 7.1 in Custo...
Summary: to work in a Linux environment. My box is running RedHat 7.3 and has three hard drives. 1 is in use by Linux and Windows (dual boot) the other two dr...
Summary: I cannot mount the /(root) directory when installing Redhat 7.1 on my PC. It's a 800MHz Genuine Intel, 128MB, 30GB(with 3 FAT 32 partitions). I alwa...
Summary: I have mulinux up and running in my IBM Thinkpad 355CS (running XVGA16 with WM95 desktop). My qestion is this: when I cloned mulinux the first time ...
Summary: Hi guys.. I am really new im linux.I installed redhat 9.0 and i was using XP so i have to make a dual booting.I read 'bout lots of things in this site...
Summary: I had the same setup going. I grabbed a copy of Partitian Magic and setup a 6 gig(you might want more) partition for linux. Out of that partition I cr...
Summary: You need to put Grub or Lilo in the Master Boot Sector ('MBR')(1st sector of the hard drive). I don't know with 2k, but with XP it got a lot easier wh...
Summary: hopefully somebody can help me out cause i have been strugling with this fo a long time. I had linix on the computer now i am trying to get rid of it ...
Summary: Hi! I've just installed Linux Suse 7.3 Pro onto my second hard drive, so that I have the following partition setup. hd0a Fat32 hd0b Fat32 hd0c Fat32 h...
Summary: There's a good change your BIOS will not allow you to boot past cylinder 1023. Therefore, I would make a small boot partition for linux to make sure ...
Summary: You can also do this: First install NT and XP and get that working so you have a menu at startup that allows you to choose between the two. Next make ...
Summary: Er yes (and no). Any partition can reside above ~8Gig, but BIOS cannot execute code above that point (boot code) It isn't a lilo prob but a BIOS maker...
Summary: A lot of people have wanted this info so here it is. IF I have too many typo's you can search for dual boot linux and nt. That is how I learnd. I had ...
Summary: Ok, I'm accepting the 1023 cylinder limitation for booting as a given (I've read the how-to's on getting around it, but for the time being I'm trying ...
Summary: I've just installed RH9, (very crispy!), but this is my first experience with linux. I want to run a dual boot with winXP, and I just got some bad new...
Summary: It is recoverable. You can reinstall Mandrake and just don't format the patitions. But I suggest you use a boot disk. Like NT, XP doesn't share the bo...
Summary: Why don't you use GRUB from RedHat Linux 9.0 as your bootloader? It can boot either RedHat or Mandrake. Look in /boot/grub/grub.conf and insert the ...
Summary: I bet its some problem with your partitioning scheme. Perhaps you should, in installation program, FORCE your /boot partition to be primary partition....
Summary: I am trying to dual boot WinME and Red Hat 7.2 I am currently running an AMD Athlon 1.4Ghz with 256Mb RAM I have two Hard Drives: Western Digital 30G ...
Summary: harddrive - 40gb problem - how many primary partitions do i need to make for linux. i want to dual boot linux redhat 7.1 with winxp, after creating a...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
