Summary: Dear sir, I have OS2 Warp 3.0 Images on CD with .DSK Extension and size of ,DSK File is 1.8MB, How I can tranfer this image to 1.44MB Floppy or How I ...
Summary: working on this problem also... wondering if using winimage to make a image of the install disk and then making a bootable cd from that,with also disk...
Summary: OK - I got the original machine working now. I can create a bootable disk - using the SYSINSTX command. I'm getting SYS02027 error with the new hard...
Summary: Dalf, I wanted to let you know that I downloaded & installed DaniS501, DaniATAPI & DaniDASD which provided DRAMATIC performance improvement over the I...
Summary: I would like to know how to make a 18 Gb drive totally available to OS2 w3 without reinstalling the system. The drive is only to store data, not to bo...
Summary: There is no doubt that i selected the correct drive when picking the destination drive. (going from a 6gb to a 20 gb is hard to screw up). I am having...
Summary: Hello everyone! :-D I was trying to make a UpdCD: http://xenia.sote.hu/~kadzsol/rexx/sajat/readme.eng But I can't find the damned Fixpaks! I went to H...
Summary: Hi: I'm new on OS/2, How to make a partition bootable. I don't have the installation disk. or tell wich files do I need to make the partition bootable...
Summary: I run OS/2 4 and 3 only, I want to flash my asus mother board bios to be Y2K compliant but for that I need a dos boot disk. I don't have a dos compu...
Summary: try to use windowsNT or windows2000 boot loader to make the duelboot. youcan do: step1:creative a bootable volume install your os/2 system.the volume ...
Summary: Thank you for your response. BTW, it's OS/2 3.0. What I am trying to do is that I have created the utility disk from a working system. Now, I am tryin...
Summary: Hey, I tried the Winimage program to copy my disk and then transfer to cd.. Well, It doesn't work(Winimage)!!. I get to the third disk and I only see ...
Summary: Dear Mr, Is anyone know, how to make the OS/2 Warp 4 installation CD can be bootable, so I doesn't need to make 3 floppy disks set to install OS/2 W...
Summary: Maybe some hardware went bad (e.g. RAM), test this and do a chkdsk on the drive booting from service floppy disks or bootable CD. Another thing is you...
Summary: Hobbes is another OS/2 resource that you should visit at: " http://hobbes.nmsu.edu/ ". Can you install Warp V4 from V3? I don't think so. I recall th...
Summary: My brain went in hard reverse for your question. Your system has a CD that is not on the install disk. You need a driver for the CD on the second di...
Summary: IF you have subscribed to IBM's Software Choice or have purchased Serenity Systems' eCS [eComstation]subscription, OS/2 will now come with a bootable ...
Summary: I don't have a toshiba laptop. I have a NEC one. but.. Oops. 1) OS/2 and Windows need to have the boot blocks for the operating system within the f...
Summary: Yes, go to the IBM.com site, go to Thinkpad support and in the 700 series (755?) you can download a complete set of installation disks for large hard ...
Summary: Trying to install XP on an abit BP6 dual 433 celeron with Samsung SV6004H (60GB) on primary master of onboard IDE (not the HPT366). Installation goes ...
Summary: In the past I used some imaging software like Powerqests DriveImage but its not very handy (cannot extract single files from image, can only save to F...
Summary: It amazes me what apparently poor advice is being given here from so-called experts. If you get an "operating system not found" error you MAY have me...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
