Summary: I have a wired desktop with win2k Pro and a wireless laptop with XP. Netgear wgr614 router. Verizon DSL westell 2200 modem. Modem is in full bridge mo...
Summary: I have a fresh install of Windows 2000 on an AMD Athlon machine using an SMC EZ 10/100 NIC. We recently reconfigured the network, adding a router (Ce...
Summary: If your client is getting a 169.x.x.x IP it is probably a 169.254.x.x. This is automatic private IP addressing or APIPA. If the client is set to obt...
Summary: i just installed a dhcp server but but before then i set the NIC card for a static 192.168.1.1 address. after the dhcp installation the address is co...
Summary: hi, installed win2k server and have enabled dhcp and dns. i've set a new scope of addresses for the dhcp, however, in notice that under the dhcp mmc ...
Summary: connect one computer direcly to modem to see if you get a 192.168.1.100 ip address or a dhcp ip address, if its 192 its your router, need to release a...
Summary: Hi, I have 2 comps both running win2k pro. One is connectd to the linksys broadband router+AP and the other is connected to the Wireless network adapt...
Summary: do they both have network (ethernet) cards? if so, set the TCP/IP address of your pc to 169.254.201.100, and the TCP/IP address of the laptop to 169....
Summary: I have only one network card but when I install the program to connect to the internet, they emulate another network card that is PPPoE, use to intera...
Summary: Hi,wonder if I could ask a q? I run VPN on a home network, Firstly is there anyway to send an automated message to clients who are joining my server v...
Summary: Have you tried just doing a ipconfig /all and check to see what IP address you are getting? If you are getting one in the 169.254.x.x then from a comm...
Summary: I have a home network (Win98) and a Linksys BEFSR41 router. My ISP is Comcast with cable modem. I installed Windows 2000 on one computer and I cannot ...
Summary: Don't set a static address. Leave your pc set as a DHCP client. When at work, it will get an address from DHCP. When at home it will try to get an...
Summary: I have 2 test windows 2000 Pro PCs connected via a cross over cable. Both are set to automatically assign them self’s an IP address. Each PC gains a ...
Summary: there isnt a network adapter 1 but even if i uninstall the network adapter then reinstall it it comes back as network adapter 2 in computer managment ...
Summary: Try PhArAoH's resolution. You need to go into the laptops tcp/ip settings and set the ip address of your server as the laptop primary DNS server. Al...
Summary: I have installed a small peer to peer or 3 Computers, AThlon 1200 256 Meg. The event log message is Your computer has automatically configured the IP ...
Summary: All that i did was setup all of the machines to automatically obtain IP addresses, the ones it has given are in the 169.254.x.x range, though i don't ...
Summary: My NIC cannot find the DHCP to obtain one. If I specify the DHCP IP address in the registry, I still get "The specified domain either does not exist o...
Summary: Hi there, I use a router to let my computers connect to the internet... Usually it gives the right ip to all computers automatically. The problem is n...
Summary: I have RRAS setup on my Win2k Server SP3 and I am able to connect to it but its not giving the clients the proper ip address. I have DHCP set up on th...
Summary: I have a small home LAN consisting of two Win2k machines. I have set up internet connection sharing on both but the client always seems to come up wit...
Summary: Fergus. It is not necessary to set an ip address because w2k support APIPA which is by default 169.254.0.0 /16. So travis u can shoose to use TCP/IP o...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
