Summary: Subject: arachne (not enough memory???) OS: dos CPU/Ram: 486/4Mb i have two machines at home both give me this message when i try to install arachn...
Summary: I posted this a while back but I am getting that problem again after I thought I fixed it. I did for one user but another one has this after insallin...
Summary: well i have had this problem and also seen this problem on a number of computers, now on my old computer i would have a hollow distorted low quality s...
Summary: Name: ITGuy Date: November 16, 2001 at 19:51:36 Pacific Subject: NT DOS external Command problem again Comment: I posted this a while back but I am...
Summary: I'm stuck here again .,I have a downloaded driver for a cd rom drive and know if I can get some easy walk through instructions I'll have this thing be...
Summary: 'bias'... that's almost cute ; ) Just to echo what Mick said - if your floppy drives are being identified as other than A: & B: then something is seri...
Summary: hi i got a problem again. i used the ranish partition tool. then deleted the linux partition, created the windows fat 32 partition, formatted it but s...
Summary: I just really hope someone has any idea about this.. up until last winter i had been succesfully, without any problems, running arachne with my (major...
Summary: Hi Trevor, DOS PPP dialers is an issue that probably won't be completely resolved ever, i prefer to address this problem using a separate approach but...
Summary: I presume that the the setup wizard auto-detected the modem correctly and that you set the maximum speed to 115,000. Did you supply the ISP's DNS ??? ...
Summary: I recently downloaded the Arachne web browser for DOS off some website to install on my old 486SX-25mhz 1mb RAM, Color Video Card, etc. Anyway, I inst...
Summary: I have tried several methods to get Arachne working on a laptop with a 3c574tx pcmcia ethernet modem. Arachne loads okay without the driver for the m...
Summary: Although i've asked this question several times over the last couple of years, without success, i'll try again as the problem still occurs.. I have hi...
Summary: This normally isn't a problem using a boot disk, but look at the autoexec.bat and config.sys files to remove any files, drivers that aren't needed. I...
Summary: HI again I.T ppl :P Well i tried to configured that driver for the cdrom, but no effects :( According what u guys gave me , : http://www.driverguide.c...
Summary: Many thanks for all those that sent in suggestions about my ‘booting problem. I am pleased to say that I used a Pretty Park fix. This got rid of...
Summary: Regarding your missing DOS files, according to a document from the Arachne website, your must not have your temp variable set to c:\dos, or your DOS f...
Summary: I have two hdd's. Both are Samsung SV4002H. One developed a problem, whatever I work and save is only untill I reboot, after reboot all my work, mail ...
Summary: Arachne dials but won't go anywhere. It actually connects to the ISP but then won't go to any webpage. There were no options that I didn't understan...
Summary: i reformated the hard drive and used my boot disk, i opened fdisk on my boot disk and partionied my hard drive c:, it displayed the wrong amount of of...
Summary: thanks to both of you. However, I've tried both with no success. I keep getting the message, "Incorrect DOS version". Maybe I should also tell you ...
Summary: Desktop -> options -> personal setings -> that must be it... The problem is that if you select this option, and you check your mail, arachne keeps do...
Summary: You're posting in the wrong forum, but I'll try to answer your questions anyway. All of your data, including the OS, are still safe on your D: partiti...
Summary: Arachne will dial and connect, but then when i type in an address, nothing happens, except the "can't open connection" error. I know its connected and...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
