Summary: How do I change the FSB speed on my P4 williamette1.5Ghz.? And What are AGP/PCI dividers? How and why would I change these? Will increasing the Front ...
Summary: I use 37.5MHz as the safe max for the PCI bus. AGP would be double that, or 75MHz. If you go higher than 38MHz, you run the risk of problems with AGP ...
Summary: in my bios i have the option to set my agp to run at 66 if i set this at 66 will the pci automatically stay set at 33 when overclocking http://www.tw...
Summary: Hi, I have a DFI PS83-BL motherboard and an SATA HD giving me problems. In order to overclock, I need the "Async AGP/PCI/SRC" option enabled in the bi...
Summary: I'm confused. When increesing the FSB i have herd that it also increeses the AGP, PCI, and ISA mhz. Everywere I have a "?" could you tell me the mhz. ...
Summary: I have ebayed an Abit At7 (plain one with IDE RAID and no PS2 ports), AthlonXP 2500+ and a stick of 256Mb GEIL DDR to make use of an old case, power s...
Summary: Hi all. I have a Chaintech CT-9PJL MB and I'm using the Apogee software to adjust my FSB which works fine. To be on the safe side I'd like to lock m...
Summary: Ok this is my motherboard: Biostar P4TDP Can I lock the AGP/PCI in this one? I can't seem to find option in the BIOS settings... can you guys help me?...
Summary: Only if your motherboard supports it (via bios or through switches/jumpers), but most boards don't. Overclocking the front side bus increases the spe...
Summary: Just so you are aware.. PCI Bus speed is the frequency at which your hard drive, PCI slots, USB ports operate. The default speed is 33.3mhz, overclock...
Summary: Right now, there is no performance difference between AGP & PCI-e...the problem is, motherboard & video card manufacturer's are abandoning the AGP for...
Summary: Hi my question to you pros is about the p4t533-c maiboard. I have checked the most current manual but it doesn't mention it. In the bios i have an opt...
Summary: Hello right i have cpu OC now at 3.7ghz everythign runnign fine and stable but now im curious about the agp 66.66mhz speed if i increase this what wil...
Summary: I hae a PII233 happily running at 83Mhz too. I also have a PII300 that absolutely will not run stably at anything over 66Mhz. Kinda the luck of the d...
Summary: sounds like a lot of trouble just to get to 400 DDR with a barton, when some resarch on some overclocking forums would tell you what is the best mobo ...
Summary: Hi, i own a system as follows: amd2400, corsair 512mb ddr333, geforce 3 ti200, GIgabyte Ga-7vrxp My mobo was one of the first with kt333 and has a fea...
Summary: Why do you want to do this? What are your plans once you unlock it? Raising or lowering the setting? Overclocking the CPU itself (i.e. raising the mul...
Summary: Your ratio should be set to default, which should be 17 (P4 1.7Ghz). The only way to overclock your CPU is via the FSB and be very careful since you c...
Summary: Well first of all your computer specs would be nice because then people can help you more. If your computer is a namebrand pc you miles well forget a...
Summary: What's extclk? I'll answer as if you're using BIOS to overclock I have a p4 3.0. I can easily overclock it to 3.7, but it's not prime stable. I lik...
Summary: Hey all, I just had a question about some overclocking I did recently. I overclocked my 2.4 (800 fsb) to 2.7 Ghz (900 fsb). To do this I would overcl...
Summary: The best you can do is use a program called clockgen, but you won't get very far considering you can't lock the agp/pci bus. Other then that you can ...
Summary: yes like i said to begin with get the sata drive or a better video card these are things that will really improve performance in your computer the 250...
Summary: that pc2100 memory will or is already holding you back....the ideal configuration is to run FSB and memory in sync, so it's already in sync at 133, bu...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
