Summary: Hi, I'm hoping jefro is around. I have Zeta 1.5 everything is good except for one little detail. In the Printer Prefs, Printers setup all goes well th...
Summary: In Zeta 1.2, I'm trying to install "HP PCL3 LaserJet Compatible" printer driver, which works fine in earlier versions of Zeta. How do I install it? Th...
Summary: Enternet is a commercial PPoE application. If thats the way you need to authenticate to your DSL you can forget about it under BeOS, if its a non-stan...
Summary: I've sent this email 3 times to Gobe Software with no response. I've called their office 3 times and left messages without response. Is this the suppo...
Summary: Yes, no, maybe? A driver that might have worked was on Bebits.com. BeOS boots each time and looks at the hardware device ID and looks at what drivers...
Summary: I purchased a Creative Labs Soundblaster PCI512 sound card because it was listed on the Beos ready hardware list. After installing this card, it worke...
Summary: JotaPe, Forgive me if I did not understand everything you are asking. I think you are trying to ask if BeOS will be compatable with new computer hardw...
Summary: Hello all, I've tried to install beos on my computer (it's a Pentium 4 1,5 GHz, 512 MB RAM DIMM, Asus P4B motherboard, nVidia Riva TNT2 M64 AGP graph...
Summary: when i installed BeOS 5 pro the first time on my computer, i split up the harddisk with Be-partition magic. BeOS got a place of 1.5 GB to work with. t...
Summary: I stand by my original maybe, maybe not, maybe. Openbeos has a PPC board and there might be a zeta port but for sure not at R1. The Mac is changing a ...
Summary: What version of NTFS are you using? (You're probably using NTFS version 4 if you're running Windows NT 3.x or 4.x. You're almost certainly using NT...
Summary: http://www.tycomsystems.com/beos/x8... You can get various versions. The most basic is a free personal edition at bebits.com. There you will find so...
Summary: Yes, Zeta has the same boot manager, but I have tried that one and the one that comes with Mandrake Linux, but both fail when it comes to trying to us...
Summary: First of all see Frizbe.net. Then see these places for ideas and apps and drivers. Betips.net Bebits.com Bedrivers.com Beunited.org --Is there any in...
Summary: Ah - finally! After 3 hours search I found somebody with the exact same problem :-) For the record: NIC: 3COM EtherLink 10.100 PCI 3C905C-TX (HW...
Summary: Hi I'd like to install BeOS 5.1 Dano. The CD i've downloaded is not bootable and i found no bootdisk image. does any one now how to install dano? i t...
Summary: Hi - I've just installed BeOs 5 PE on a Compaq Deskpro EP - Win 98, Celeron 333, 4 Gig HD, 64MB RAM, Matrox G100 Video. BeOs loads without problem fro...
Summary: I have a HP Deskjet 840C printer. I am trying to use it under BeOS. Is this printer a postscript printer? Are there any driver for this printer under ...
Summary: I'm having a similar problem. I'm running BeOS 5 personal edition, although it pulled it out of the image file and into its own partition using In...
Summary: 1. Dunno. S3's don't do well in BeOS. 2. pcmica support is limited in the official 5.03 release. You could mine BeIA or Dano5.1d for pcmica but both a...
Summary: You can not set the AGP to 4x on Chaintech 6BTM because it's a BX board. But I'm using 2x on my ATi Xpert2000 32mb. My CPU is Celeron633 overclocked t...
Summary: I want to install Beos 5 Pro on my computer and having the following problem: My computers hangs himself when setup is copying files to my harddisk. I...
Summary: What is this MiniMax you may ask? It is a striped down version of BeOS 5 PE Max Edition V2.1 (YES V2.1 is almost ready) with no extra packages, it on...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
