Summary: Ive read a lot of stuff about xp2000+ now when i go to bios and change it it wont load up windows xp i have it as 100/100 im trying to get it 133/133 ...
Summary: Original Message Name: Killaspawn Date: August 24, 2005 at 02:24:20 Pacific Subject: Xp2000+ runs as 1.25ghz OS: XP CPU/Ram: 512mb Comment: Ive re...
Summary: Last night I discovered my AMD Athlon 1.33 GHZ system was running at 1.0 GHZ. I thought that maybe it was just a bug and it was actually running at 1...
Summary: For some reason my Athlon 2500 Barton is running at 1.1GHz instead of 1.833 according to dxdiag and 3DMark03. On the BIOS, it shows up as a 2500 with...
Summary: I've recently upgraded my Celeron 2.4ghz to a Pentium 4 3.0ghz, but I noticed today that it's only showing up as 1.5ghz in my BIOS. After a lengthy Go...
Summary: Hey YO, If the multiplier is locked (which I had asumed it was) & the CPU was intially recognized as 1.25GHz with the FSB at 100MHz, the multi is obvi...
Summary: Hi there, i'm in a bit over my head here, i'm building my own pc and everythjing seems to have gone fine except my CPU which is an AMD AthlonXP 3200+ ...
Summary: Update: I have just checked under my system settings and the CPU is recognised as a 1800 Athlon XP. I know for a fact the CPU i purchased was a 2400, ...
Summary: My cpu is only running at 1.25GHz. I have a MSI KT4V motherboard which should be able to run at 200, 266, or 333 FSB but is only at 100. To change t...
Summary: I have an athlon 2000+ on a biostar M7VIQ motherboard. At first it would only see the processor as 1.25ghz. I changed the cpu frequency to 133 mhz fro...
Summary: There is no Athlon 1.6...the Athlon maxed out at 1.4. You probably have an Athlon XP...either a 1600+ (1.4GHz), 1900+ (1.6GHz) or most likely, a 2000+...
Summary: sry 1.70 runs as 1.65v...i was not looking at the bios when i said this...it runs .05 less then it is supost to. I have it maxed out at 1.8v wich run...
Summary: Pedro your score seems reasonable....i have a xp2000+ running at 1.74ghz which is slightly faster than yours i think w/ati 8500le, samsung 333ddr, and...
Summary: I too am having the same problem..I just recently hooked everything up same motherboard and CPU as well. I have the motherboard set on factory default...
Summary: I would be eternally grateful to anyone who could help me out with this… I’m running an XP 1700 on an ECS K7AMA motherboard and the bois only recog...
Summary: I have an athlon 1.4ghz processor and a k7vza mobo(at least thats what i think it is im at work so i cant check that), and i have the jumper setting f...
Summary: Hi, I recently put together a computer based on an ASUS mainboard and an athlon 2000+ cpu.. once i had winxp and the asus software installed i was po...
Summary: Like I said, I cannot raise my FSB beyond 103Mhz, my system will crash if I do it. Right now my CPU FSB is at 100x2 (200Mhz) RAM is at 133Mhz. When ...
Summary: CAN ANYONE PLEASE TELL ME A SAFE WORKING CPU TEMP FOR MY CHIP UNDER AND WITHOUT LOAD. IT IS CLOCKED TO RUN AT 1.7 GIG AND ALL SEEMS WELL. NO LOAD IT S...
Summary: When O/C'ing the CPU, you should strive for the highest possible stable bus speed, not necessarily the highest overall clock speed. The default speed ...
Summary: Thanks for the reply. I installed the unlocked XP2000+ and this is what it is running at, with the settings controlled by the motherboard.. Internal c...
Summary: I've looked around this forum for a solution to my problem, but I haven't been able to yet, my AMD Athlon XP 1800+ won't run at 1.53 GHz. My mobo is E...
Summary: "overclocking is only as good as your motherboard, processor and ram etc" Exactly! And an experienced overclocker will buy components based on that! "...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
