Summary: Hi, Just thought i would share my overclocking results on my new xp2500 mobile cpu... 211x12.5 = 2644Ghz @ 2.0 Vcore .. temps ... Idle 41c / load 48c...
Summary: Hi again , "Did you try 13?" I have to admit i havent tried x13 multi yet ...? i may give it a go ... i was just blown away the my current settings..l...
Summary: Here are the results from my previous thread, you can add your overclocking results here aswell if you haven't already done so. RESULTS: Dennis: P3 10...
Summary: k, This is where you post your overclocking results (CPU only). I love to see overclocking results becuase it tells you which processes are good and w...
Summary: Once again, overclocking results vary from PC to PC; even when assembled from identical components. The "LAN Party" KT400A is a very good board for ov...
Summary: I seems that the XP2500 mobile is the new best overclocker in the Athlon XP line. It runs at 4.5v, and has a higher heat threshold. And it can run at ...
Summary: http://www.emboss.co.nz Just Found this site while trying to answer a question about my mobile 2500xp My question bieng:- Is is normal for sandra(2004...
Summary: Hey all, I just had a question about some overclocking I did recently. I overclocked my 2.4 (800 fsb) to 2.7 Ghz (900 fsb). To do this I would overcl...
Summary: Hi ..jam What cooler you got with that sempron...? AMD's can take more voltage than 1.775v..(with a nice cooler.!!) Plus i would'nt be to afraid of pu...
Summary: Ok.. im gona say this but someone might pipe up about me being wrong....lol Anyway... I heard that OCZ memory was being investigated for overclocking ...
Summary: I am going to upgrade to an xp2500 and overclock it. People have suggested the Thermalright SLK-900A but it is listed for xp2800 and up. Wanted to m...
Summary: When I overclock this video cards core even 1 MHZ and apply the changes it freezes the system instantly. It doesn't matter what program I use to overc...
Summary: "This is my first overclocking expirement" That's obvious. Your CPU runs at 9 x 66MHz. The multiplier is locked & cannot be changed. If you increase t...
Summary: Ok, thanks, thats what I was thinking. I've got some corsair PC3500 memory right now. How much further than 400fsb can the NF7-S get? And what heatsin...
Summary: iv been running my Barton for a long time now with the below settings. Abit NF7-S V2.0 Mobo, xp2500 mobile @ 200x11/1.525v, 2X512 crucial Pc3200/11.2....
Summary: For best overclocking result, I'd highly recommand water cooling or vaporchill. Best heatsink and high RPM fan works, but you won't able to overclock...
Summary: aj- There is no set standard of "safe" standard in overclocking. Results vary from brand to brand, model to model, and even card to card. If you ov...
Summary: can somebody tell me what the standard settings are for this cpu,volts, fsb etc. as i'v never run it as standard and i would be interested in trying i...
Summary: Athlon Mobile overclocking... I'm telling you, it's the most fun you can have without having to cuddle afterwards! :-) MCSE, MCSA Messaging, baby! ...
Summary: Hi all, I posted sometime ago that I was having problems getting my XP2500+ to overclock to XP3200+. I thought I had a solution (raising VCORE), but t...
Summary: Hi all, Just thought i'd share my overclocking results. Please tell me what you think and if i can make any improvements ?. SYSTEM :- CPU- 2400xp o/c ...
Summary: Ive got an xp 2500 barton that is unlocked and all i could squeeze out of it was 9.5 x 222 and im pretty sure its not my memory (kingston hyper-x 3500...
Summary: One thing is certain, you are not going to be able to damage...cough....fry that CPU. Now regarding how high you can push the clock, that you will hav...
Summary: How does the Sempron 3300+ based on the new palermo fair in overclocking? You be the judge. Sempron 3300+ Default Sempron 3300+ @ 2.0ghz Defualt vo...
Summary: I am trying to find the highest speed I can overclock the northwood while maintaining stability. My MOBO is has a 533/800 FSB and the northwood is st...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
