Summary: Hello, I have just replaced my motherboard. I have an XP 2100+ Thouroughbred processor, and want to know if its OK to use the 400 MHZ FSB on that chip...
Summary: I blew my CMOS to hell when I attempted to make multiple adjustments. Thanks for telling me now!!! Okay, it's under warranty with newegg.com and the...
Summary: anyone know anything about azza mainboards? i have an azza KT-400-ALH with ddr 400 support and 8x/agp with an xp2100 266mhz fsb i need to know if i ca...
Summary: That's what I'm doing, what do I got to do for these settings to work and what exactly does each do or apply to. I'm used to straight jumpers this % t...
Summary: i have my xp 1800 running at 1743 mhz (xp2100) all fsb overclocking, it runs stable at 1.87 volts, idle in room at 28Celsius it is at 44 celsius, moth...
Summary: According to Gigabyte it depends upon the version of motherboard you have. The highest CPU for the two version is: Model: GA-7ZXE (Rev 1.x/2.0 PCB: 1....
Summary: I am having problems with chaging the FSB to 133. I bought a xp2100 and on boot I see xp1500+. I changed the jumpers on the MOBO to 133 when the defau...
Summary: FSB is not locked (and it generally never is on any cpu). The multiplier might be locked. Taking that you specifically stated 2400+, it's a Thorough...
Summary: Ok people, serious problem. I build systems for a living and have come across a serious stumper. Here's the situation: I have 3 Jetway 830ch mainboard...
Summary: There are three Athlon XP 2600+ models. Two Thoroughbred core. One with 133MHz FSB running at 2133MHz, one with 166MHz FSB running at 2083MHz and ther...
Summary: Should the FSB be set different between the xp1700 and the xp2100. The 1700 runs good set at 100 MHZ. sHOULD THE XP2100 BE SET AT 133 MHZ. ...
Summary: Dr. I am cureently running Wintec 512mg ddr PC2700U with a XP2100+ set to 166 with my fsb at 147 if you do the math it breaks down to 2x184=368mhz dat...
Summary: I've perused the forum and seen many issues similar to mine, but regretably no solutions that have worked. Problem: My Athlon XP2100+ is detected as a...
Summary: Okay, if anyone has this combo can you PLEASE tell me your bios settings or where i can find them.I cant set to 133mhz fsb without it freezing and I...
Summary: Hi, here is my configuration: XP2100 boxed with fan Asus A7V333 m/b 256 DDR-333 Ram 300W PSU Asus GForce4 MX440 Average CPU Temp 71 Average Room Temp ...
Summary: Simple question: Will a cpu (Athlon 2600+ Thoroughbred) with 333 MHz FSB work in a MSI 745 Ultra mobo with 266 MHz FSB? Thank you for any comments. ...
Summary: can anyone find any athlon xp's with the thoroughbred core for sale? more specificially the 2600+. I'm talking about the old school ones with 266 fsb;...
Summary: thanks to you both for your replies! i used that program and, johnoh, you are right, it says that it is a thoroughbred 'A', model 8. >And yes a sudden...
Summary: go with an nForce2 motherboard and avoid most of those problems and i've read where the 1700+'s do very well on overclocking and the 1700+ is a thorou...
Summary: so if I can go into my bios like the user "KC" can and change FSB to 166mhz/PCI 33mhz (333mhz fsb, right?), and seeing how my board has a max. multipl...
Summary: Hello I have a XP2800 and a MSI K7N2 and 2 sticks of 256mb ddr400 (dual channel setup) and i can hit 400fsb (200 in the bios) with a multiplier of 11 ...
Summary: I just reviewed that board too. The fsb will run up to 154Mhz and if all goes well you'd end up with a 2400+ running at just over 2000Mhz. This boar...
Summary: here some questuions! I have Athlon (Thoroughbred) XP 2000+, Asus A7V8X-X, 512Mb PQI PC2700 CL-2-2-2-6 . I was able to OC to 1900Mhz (12.5*152 with vo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
