Summary: Hi, I installed XP Pro after I took out the soundcard that was giving me problems with the first installation. Now that XP is working fine, I installe...
Summary: Thanks Scott. This solved my problem! ---------- Re: Name: Scott Date: June 17, 2002 at 12:07:28 Pacific Subject: WIndows XP Hangs After Reply: I u...
Summary: Hi. I installed a new hd some weeks ago. After I had installed it. WinXP is slow to startup(from the welcome screen) and after it has loged on. I did...
Summary: Everytime I boot into XP using the 80 Gig, XP automatically pops up with a "new hardware found" bubble in the system tray. After that bubble disapears...
Summary: Win XP pro, Pentium 4 1400MHZ, 850GB. My XP was hanging up. I turned to safe mode. XP hangs on shutdown even I start in safe mode. Now what? Window...
Summary: Everytime that I boot XP I get "new hardware found promise fastTrak 376 raid controller". This started after I tried to install the latest driver as ...
Summary: My computer is not doing so well. when I startup win Xp, i get "New hardware found". I have no new hardware. When I look in the device manager i see ...
Summary: Hey guys, Thanks for all your messages.. I do have a recovery disc with i386 folder.. what can I do with this.. I saw on another forum to look for the...
Summary: I had the same problem with a PIII 933MHZ, XP installation hangs after first reboot. Underclocked my cpu to 466MHZ (used BIOS failsafe default)and XP ...
Summary: I just purchased a cell phone which has all the bells and whistles (Motorola Razer2 V9m - Verizon) and I am trying to sync it with Windows Media Playe...
Summary: Hello My computer is not doing so well. First of all, when I startup win Xp, i get "New hardware found". I have no new hardware. When I look in the de...
Summary: Hi folks - I have two areas of troubles. [B]Start Up[/B] Immediately upon my pressing the on button i get a black dos screen with the following messag...
Summary: I am upgrading a friends comp from old Intel 700 mhz to new MSI MB with Athlon Xp 1800+. After new MB installation XP would not boot so I began a form...
Summary: The DMA is enabled in all the bios of the computers. This problem only occurs when you first boot the computer up. If you boot up and have waited for...
Summary: not installed any new codec ... a friend of me told me the "tedum"-sound is a sound when new hardware is found. how can i disable it to check if its a...
Summary: Same answer as Jack. XP hang if some hardware is messed up. This is from Microsoft tech: You may see a STOP error if the Windows NT Loader cannot reso...
Summary: Trying to connect a Logitech PS2 Trackball to a Toshiba laptop w/o a PS2 port. Bought a PS2 to USB adapter. XP recognizes that new hardware is connect...
Summary: Are you running an IDE or SATA drive? If IDE verify the drive is running in DMA mode. If SATA run a speed test. Both can be verified from within D...
Summary: Most likely the O/S is looking for the old hardware and is throwing a wobbly !! You will need to re-install XP so the new hardware is properly found a...
Summary: Hi Everyone, We have a network drive E: , and anytime I put in a USB drive, it causes a conflict and does not get listed among the available drives. I...
Summary: I had some employees with recent mup.sys problems, and after fixing it, I found that other people posted a similar problem here a couple of months ag...
Summary: Make 2 equal NTFS partitions on that 200GB harddisc and try it again. If you can't access the HD anyway unplug all other HD's and connect your new one...
Summary: Hi, I recently upgraded my system, and now I am having a problem with XP locking up / freezing whenever the PC is left idle. Once the PC is hung, it m...
Summary: Hey, When i installed XP it did not install my cd roms. My CD roms are SAMNSUNG DVD-ROM SD-608 and a SONY CD-RW CRX140E. I have the drivers for these ...
Summary: When you install a hard drive that already has Windows 2000 or XP (and probably Vista) on it that was set up on another computer, if the difference in...