Summary: My notebook was acting a bit wonky, with the Windows Installer running 5 or so times each time I went to open certain, but not all, programs. I went t...
Summary: I have a copy of Win2k Pro and I believed I burnt it successfully onto to cd (I believe I followed the instructions in the procedure to burn Win2k Pro...
Summary: IBM Thinkpad won't boot from CD or USB floppy. Startup boot settings are correct. IBM Help can't resolve on the phone. Anyone else have this problem? ...
Summary: My 2000 disc won't boot, i have my boot order set to this: Floppy CD-Rom HDD-0 I really really need to boot to this to recover the file "vgaoem.fon". ...
Summary: When i created the copy from the original i ran CD Creator and selected make a data CD and then the format a directCD disc, this created the Win2000 C...
Summary: I want to install Windows 2K, but my BIOS won't boot from CD, and my four boot disks to boot the installation have an error every time I boot up my PC...
Summary: I've tried to launch knoppix STD to retrive lost password on a lap top. I burned a cd with Knoppix STD on. Put it into the computer i tried to get pas...
Summary: Hi, I was working on my laptop and all of the sudden it began a physical memory dump. When it tries to restart, it hangs at the progress bar (the blac...
Summary: Ok... I think the bios is set up correctly, It still just sits there and reads verifying dmi pool data...with the cd drive spinning up and down. I al...
Summary: Recently bought new components for a new computer. I'm using a abit KT7/KT7-Raid Motherboard, brand new. Using an adaptec 2940W scsi adapter, new ibm ...
Summary: My system get about 2/3 of the way through installing Windows 2000 and then I get the following stop error: Stop 0x00000050 Page Fault in Nonpaged Are...
Summary: I turn the power on and it gets to the "starting up..." logo screen, and it gets about halfway then won't go anymore, even after about 10 minutes. How...
Summary: I burned this copy of Windows 2000 Advanced Server and when I try to boot from the CD it won't boot. I burnt it using Nero, and it seems fine. I curre...
Summary: Au secours! Ayudame! Help! Here's what happens: I try to shut down or restart from the Start menu and it seems to close everything, but then freeze...
Summary: Usually a dump screen (sometimes referred to a BSOD - blue sccreen of death) means a re-installation of the OS; unless one is able (and has the time) ...
Summary: Attempting to upgrade a Pentium I, 133mhz PC (it was previously loaded with Windows 98), I wiped the hard disk clean, formatted it NTFS, loaded it wit...
Summary: A friend of mine had a lot of virsues on this pc. I fdisked and reformatted the HD, re-installed 2000 Pro, and her software, drivers, etc. Everything ...
Summary: The item you're missing is that the boot/start-up files for both installed OS's have to reside in the C: system (acive primary) partition - i.e. C: dr...
Summary: Experts, I installed a PowerDVD trial version on my win2K system. When starting the program, a blue screen appeared and the system won't boot anymore....
Summary: My system: PIII/667/133 Abit SE-6 mainboard 256MB 133MHz RAM Windows 2000 professional After trying to install a new graphics card (Radeon VE) and a s...
Summary: I have a W2k on first partition of ide harddisk. if i try to boot form this harddisk i get an error message saying something is wrong with my harddisk...
Summary: It's posible that your SCSI Card doesn't support cd booting or your mother board is not compatible with your SCSI Card. I couldn't boot from Cd with m...
Summary: The only available SP was 4 so I assume that all previous patches/updates in earlier SP's are included. New problem. I went ahead and reinstall Win2K....
Summary: I am trying to load win2k pro on to some older computers at work, the problem is that although I set the BIOS to boot to CD the computer does not go t...
Summary: Not qite sure what's happening for your system but... see if the following gets you going? If you have the "W2K CD" (or set-up disks) re-run the set-u...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
