Summary: Hi there, I have a D-Link router connected via LAN on a desktop connected permanently via dial-up to the Intenet and my Dell laptop is connected wirel...
Summary: Why would the connection speed on a Remote Access Server never go above 24K on 56K modems (different ones, different cities, which normally get 54K co...
Summary: Hi, I wanted to know if it was possible to read the dial-up networking connection speed from a file or registry entry in Windows (any windows version)...
Summary: Actually--if I may make a comment--I think that Paul is seeing the connect speed shown in a pop-up box when dial-up networking connects to the ISP. D...
Summary: I have a network which uses a dial-up ISP account accessed through an NT Server running MS-Proxy (and nothing else) for internet access. Both NT works...
Summary: I'm using MS NT 4.0 sp4 running Microsoft proxy server with about 40 people connected. I would like to slow down the connection for some of these peo...
Summary: We use a small P3 proxy server with a 56k modem to connect to the internet over a leased line.Our server was down for about 5 days and when we finally...
Summary: Could anyone tell me what error message Ox800CCCOF means? I connect to our postmaster via a dial up connection, once connected outlook express tries t...
Summary: Has there been any update/fix/solution for the above? Our RAS modems are all 56K & yet the highest connection speed we get is 28K. I'd be very gratefu...
Summary: Jeff, This sounds odd. Hyperterminal should not want to dial a modem unless you're selecting a modem in the "Connect Using:" field. When you're using...
Summary: HI NT4 SP6, Exchange 5.5 Iam getting this error message in the nt logs SMTP autentification errors. "The dial-up connection 'Demon' could not be mad...
Summary: The method employed in the WAN I manage is a dedicated kilostream link to the head office (in your case this would be the current building) This allow...
Summary: Routers do much more than ROUTE TRAFFIC. Multiple ethernet ports allow for separate collision domains AND separate broadcast domains, resulting in imp...
Summary: The Server service is providing the network access. When its down/hung, you have no connection. As to why, what does the event log show when this happ...
Summary: Try turning down the connection speeds to 1900bps on the users laptops. See if that lets them in. If so, try increasing the Baud rate gradually. ...
Summary: I too was getting the same problem. So I tried making sure that ALL services DO NOT have "enable service to interact with the desktop" checked, but it...
Summary: I have no idea what dsl (a sort of cable connection?) is, but why configure the nic for dhcp if the dhcp ainīt there at all? Seems you are looking for...
Summary: I have a 56k Zoom external duel modem (Model 2949L)and I'm having problems connecting to the Internet at accual baud rate. I'm connecting at 2600 and ...
Summary: Hello, I have a D-Link router with printserver,VPN and an antenna for wireless connections. I attached my usb laserprinter to the router, and I can pr...
Summary: Hi Sandy, Only two things come to mind: 1. Which i am sure you have checked, do the individual shared resources limit connections? Just check...
Summary: I don't have this set up yet so I can't test it but I want to ask. We are going to setup a remote site with vpn. The local site will have 128k dedicat...
Summary: If you are just trying to increase your connection speed, you don't need two NICs. If you have one NIC that is capable of being used in full duplex mo...
Summary: Well I did it! I got my USR 56k internal PnP modem to finally work on NT4 sp3. Before I was getting error 692: hardware failure in port or device. I ...
Summary: I have a modem that work perfectly (OvisLink 56K modem/fax) in different computers. One day, I had problems because the internet connectiomn was slow,...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
