Summary: I understand that we should only need one or the other and that users should only use one or the other, but that doesnt help the fact that i have a si...
Summary: open up the box the router came in take out the network cable. plug one end into router and one end into pc. if not buy a patch cable(network cable) a...
Summary: Today when I booted my PC's, I got the message "There is an IP Conflict with another computer on the network" on all of the machines and the network i...
Summary: I'm having a problem with my wireless Linksys router. The computers connected to the router via ethernet cables work fine, but the wireless computers ...
Summary: I got the linksys WAP54G access point. It took a while to configure as I didn't know what settings I needed to use. Here's what I did, for those who m...
Summary: Please help end hours of newbie headaches! I have a Linksys WGA54G router which I am trying to connect to a Netgear WGE101 wireless bridge to hook up...
Summary: Hi there, this is my very first post :) so go easy on me if I'm unfamiliar with forum posting protocols etc. Thanks! So here's my problem... I current...
Summary: Ok I have a wireless router located in a small cupboard. And can pick this up on three wireless enabled PCs throughout the house. I recently purchase...
Summary: Hi, I have two wireless routers one Belkin F5D7230-4 and one newly purchased Belkin G+ Mimo. The Belkin G+ Mimo is connected to a comcast cable modem ...
Summary: How do I resolve an IP conflict between a modem/router installed by Verizon and my server. It is causing problems with my network and they can't figu...
Summary: Mac address filtering relates to dhcp. You have static ip. Have you reviewed you dhcp scope to confirm these addresses are NOT in the dhcp scope? Nex...
Summary: @wanderer I guess, this would result in the same issue, because the IP address, that was assigned to the NICs dynamically, is stored in the registry. ...
Summary: I'm trying to turn my Belkin wireless g router (model no F5D7230-4) into a Access Point. So that it can connect to my Belkin N ( model no F5D8233-4v3)...
Summary: My future setup (pic 1 below) will have my NAS and WDTV behind a WHR-HP-G54 configured as wireless bridge (Stock Firmware) that connects to my wireles...
Summary: Hi There is no static ip in the PC and also same pcs are giving the ip conflicts. What could be the reason. If u need further more info i can inform ...
Summary: Here goes, I boot a machine up and it tells me there is an IP conflict with nic bearing a specific MAC address. I down that machine, go to another on...
Summary: I have a situation where there is a Linksys DSL/Cable Router/Wireless Access Point in a basement. When someone is on the second floor using a laptop t...
Summary: Hello, I have a very annoying problem regarding a small network i made using my laptop and another old machine. First of all i can assure you that the...
Summary: I am using a Netgear MR814 Cable/DSL Wireless Router to share a DSL connection. I have it upstairs connected to the modem and one computer. Downstai...
Summary: I have an IP conflict error on ICS when I enable all the computers. But then, all computers can access the internet. It's sound no problem for the ICS...
Summary: Hello, I have 2 PCs, 192.168.18.246 and 192.168.18.200. My incoming Internet thru lan cable is hooked to a switch and both of my PCs are connected to ...
Summary: that is because wireless bridging is not supported by these units without a hack. Here is a link. Use at your own risk. http://lifehacker.com/softwar...
Summary: I just got a starband 360 satallite connection installed for a network of 2 win98 computers. It wouldn't work and I was advised to upgrade to window...
Summary: OK, Im just looking for some help. I have a 10 PC network, sharing a 33.6 dial up. :( OK, this is how it goes: Im trying to find out what my D-Link DL...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
