Summary: How do you connect a wired network (10.26.172.XXX)using static IPs to a wireless network (192.168.1.XXX) using DHCP from the Wireless Router? They all...
Summary: I have a Linksys BEFW11S4 v.2 WAP which currently connects directly to my 600 series Zyxel DSL router/bridge. I have two static IPs and two computers ...
Summary: First off I want to say that Verizon Business DSL cannot properly support WESTELL Routers and WESTELL will NOT support these routers either as noted i...
Summary: We have recently got DSL. We have 5 static IP addresses. The provider had me setup an addhost to the router which give me a 192.168.254.1-5. Now our n...
Summary: Hi: I have a winNT network domain with different computers connectings to it. Some of these computers are server hosting web sites and some are just ...
Summary: I am trying to set up a web server running on a machine behind my SMC Barricade Wireless Router. I have two static IP addresses from my ISP - and they...
Summary: I have a D-Link DI-624 router, a laptop running Windows XP SP2 and using an integrated wireless connection, and a desktop running Win2K server with a ...
Summary: I have AirTel (india) broadband internet connection and last week i got the static IP service from them. Once i changed the IP to this new one, i coul...
Summary: I have a home network in which I'm trying to get a mix of a public static IP and the rest private DHCP IPs. Here's what I started with: The service i...
Summary: Hello all! Here is my question, right now I have dsl and a dynamic IP addy that changes everytime I log onto the internet. Now I have 3 computers in m...
Summary: hello. this is probably a really stupid question, but i just cannot get this to work for me. first, i'll detail the hardware involved: motorola s5100...
Summary: I use my laptop at home and at work. At work, a static IP address is used and at home, a dynamic IP is used. Is there a way to switch between the tw...
Summary: So, I used a autoswitch and after some installation changes it works fine. I had to set the IP from auto to static for the Ethernet LAN. Is it possibl...
Summary: Well you tell the wizard that your wireless nic is the one that connects directly to the internet. And that the other nic is a network connection. Or ...
Summary: I have an odd situation: I need to connect to a network, but it will only accept certain static IP's. Its not a standard range, so I cant easily guess...
Summary: hi, i have a cable modem, with a static IP, but i got two PC, so in order to have both of PC to online, i need a router. If i use a router, then route...
Summary: Ok here's my old setup that worked fine. 1: Linksys router, model BEFSR41 1: Linksys Wireless-B Access point, model WAP11 3 machines: 1: Windows XP 1:...
Summary: You need to go into your router's setup and make sure that address is not a part of the DHCP scope, or address pool from which is assigns IP addresses...
Summary: Have a linksys WRT54G wireless router. I was just given a static IP address by my ISP and tried to enable it in the setup with the given settings but ...
Summary: I have 1 static IP address via (DIRECTVDSL) and they only allow 1 domain name to point to this static IP address. How can I add multible virtual domai...
Summary: You don't need a static IP addy even if you decide to host a server. You could always use Dynamic DNS and port forwarding and this works fine. You wi...
Summary: Devices: Wireless-G Broadband Router with Speedbooster HP Laserjet 2300 Problem: The printer has a static IP and was working fine and continues to wor...
Summary: How do I 'force' an IP? I have a CPU with a Cisco 350 wireless PCI card and receive my internet access with it. The card has a static IP I got from my...
Summary: DICEMAN We get enough of a volume of posts on this site, especially in the Hardware and Windows XP forums, such that you are unlikely to get answers w...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
