Summary: Hello, Im currently trying to find out why my wireless network connection *network utilization* currently reads at anything ranging from 0.0% - 0.5 at...
Summary: Basically, two laptops in the house, both with wireless cards, connected to a Sitecom MimoXR wireless router. One laptop is in the same room, the othe...
Summary: wireless network is very unreliable. I currently use a 54G access point, however when their is so much as 2 plaster board walls in the way, i frequent...
Summary: Hi guys, I've been having a really bad problem of very very very low network utilization. 0.03% It sucks. I have 256mbps connection and the highest dl...
Summary: It's running both b and g. I'm in a house on 2.5 acres of land. The signal strength says "Very low", so I doubt my neighbors are close enough to get...
Summary: Ok, I bought a Netgear DG834G wireless router and 2 Netgear WG311 PCI adapters to setup my wireless network. Eveything is working fine, the computers ...
Summary: One PC on a cable modem 802.11b wireless network showed a strong connection to router but very slow access to internet, often timed-out. After messin...
Summary: I have 2 XP PCs and an ADSL connection running into the main home computer. I have bought a wireless router and 2 wireless netwrk adapters. I have bee...
Summary: Implement WPA as the encryption technology. If you are a Microsoft shop use PEAP authentication. Install Microsoft IAS server service (comes with ...
Summary: I have just recovered my computer after it crashed out due to trojan. It is clean now and working alright except for the wireless network card. It is ...
Summary: I also saw this issue with my DLink DI-614 802.11b wireless router. I upgraded to a Netgear G unit (802.11b/g - WGR-614 v5) and haven't really seen t...
Summary: Hi ann, you're not having a good run are you? Two seconds is usually sufficient to reset the router. This built in to prevent clearing all it's settin...
Summary: My home network consists of 3 computers (all similar specs) and a 10/100 linksys router. When I open the "Task Manager", it says the network utilizat...
Summary: Hi, I have a little problem that really does frustrate me very much concerning my AD HOC 802.11b wireless network. This network connects my desktop c...
Summary: sounds like interference, load up the xp wireless monitor, or the util that shows the connection meter, see how much reception there is. if its not ve...
Summary: Last Tuesday My BT Home Hub decided to pack up working. After a very long consultation with a very helpful Indian BT IT consultant it was decided a ne...
Summary: I have three computers connected through a 10Mbps hub, they are all set to half-duplex mode 10Mbps. When i transfer files to other computers the rate ...
Summary: I'm trying to create a home wireless network over 3 pc's. I'm using belkin 54g wireless PCi cards and a belkin 802.11g wireless router. the problems i...
Summary: The strange thing is that over in the Microsoft Newsgroups under Wireless Networking (where I have also posted my problem) many others are experiencin...
Summary: I agree with the other two ethernet is the way to go. Wireless in more of a pain then its worth. Its slow more expensive and can be very suseptble to ...
Summary: naynay did you restart your router? if not, try that 1st. if the problem is on router's end, refreshing billion times will not help you, restarting w...
Summary: please can anyone help? I have bought two usb wireless network adapters from linksys. They are up and running fine, one pc being a slave to the other ...
Summary: First of all, b wireless networks can be totally shut down by anyone with a computer with a b network adapter. For crucial business, 802.11b is NOT t...
Summary: This is really strange... i've got a dell inspiron 6000 series laptop with integrated wifi adaptor.. i have a D-link Di-524 Wireless router.. everythi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
