Summary: I have two seperate LAN networks that i want to connect wirelessly!! Is it possible to connect two LAN's using two access points!! Or is there any oth...
Summary: I would like to share one adsl connection over three computers. One computer (the 'server') is running windows 2000 prof and has the adsl modem (usb) ...
Summary: Hello, Here's a question I can't find an answer to anywhere. Actually, through nearly two days of trial and error, I'm just about ready to give up. I ...
Summary: Hi... i'm currently working on a Network Diagram for a school project... the scope of the project is to create the physical/logical layout of 3 remote...
Summary: I'm planning on bridging my two small, wired LAN's at home. I was wondering if it's possible to do it wirelessly. I have the D-Link DI-713P Wireless R...
Summary: Hello I want to connect my notebook to a college LAN, there is no one at this college who can help me. I want to be able to conect to the LAN using ...
Summary: I have two small LAN's one at each end of the country. Each is running NT Server, has a hub, internet router (DHCP with NAT enabled) and about 10-20 ...
Summary: You would want to engage ICS on the filtering machine to route between 192.168.0.x and the ap side of 192.168.1.x Be clear in your understanding. You...
Summary: I have set up a home wired network of two pc's sharing a broadband connection via a D-Link 604 router. I have just purchased a laptop and would like ...
Summary: As far as speed goes I think we will need at least a T1, that will allow for future upgrades. What I wanted was on one server in SC people will save t...
Summary: I have one LAN established in my office which is conneted to a router whose ip address is like 111.111.12.1 and my friend has one LAN in his office wh...
Summary: OK i've been complaining about this issue for a while now, and the only reason I stay on it is out of morbid curiosity. Here's the situation. I have c...
Summary: guys.. i have installed two lan cards each on our 10 PCs. one of which has DSL connection and the other, T1... so that if T1 failed, dsl will "reinfor...
Summary: my friend and i are going to setup a vpn between our houses my lan: windows 2000 (static ip's using the router as the default gateway & dns server) ne...
Summary: Hi All I have 2 separate lan's running win98SE with all 10/100 nic's.Each separate lan consists of 8 pc's on either side connected peer to peer and ea...
Summary: Hi I am in need of a crash course on maintaining a LAN. There are 8 pc's with one running winME and the others running win98, They run through a "Sni...
Summary: hie guyz.....im thinking of connecting my two pc's together....how do i go about without using a hub....thankz guyz....another thing....how do i incre...
Summary: For security reasons, I have a public and a private LAN which are not connected to each other. Sometimes it would be useful, though, to use a computer...
Summary: I have two pc's running Windows XP Pro and Windows XP Home. They aren't far apart, just about 2 metres. They both have built-in realteck nic's. a...
Summary: I have two pc's networked for printing remotely. I recently got broadband but do not want one of the pc's to be able to access the internet but still ...
Summary: Yes, both PC's must have a network interface (either a card, or built onto the motherboard). The "host" PC will need two NIC's. One external (interne...
Summary: ok.. guys i'm confused.. the scenario is the following, 2 LANs,into two different buildings, each has router that's acting as a DHCP server and enable...
Summary: Hi all, I have a question regarding putting a file sharing server on tow networks. I currently have a server 2003 file server / proxy server on a CAT5...
Summary: I Need to connect via Remote Administrator V.2.1 to one of my LAN´s computer. The problem is that RAdmin uses public IP, and each computer on my lan ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
