Summary: Hi, I'm looking to replace my ram and am stuck between these two: http://www.newegg.com/app/ViewProductDesc.asp?description=20-146-898&depa=1 http://w...
Summary: Just wondering what my best/most cost effective option is here.. I have an unlocked Barton 2500+ (333MHz FSB) on a Gigabyte Ga-7N400 Pro. I do multitr...
Summary: Ok thanks, so your saying I have to literally count the number of chips in order to find out which RAM is right for me? BTW, I forgot to mention that...
Summary: What motherboard are you getting/do you have? SD RAM is 168 pin and DDR SD RAM is 184 pin so they are not compatible with each other. DDR RAM will sp...
Summary: Hi all, Can someone help a novice? My PC is 3 years old and pretty much unchanged apart from a bigger HD. I currently have a 1.4 Athlon in an ASUS A7A...
Summary: hi, I'm putting together a new system pretty soon and was wondering which RAM speed/type would be best for me. For reference the motherboard im gonna ...
Summary: 1. which RAM brand is better TwinMOS or KingMAX (which is good for overclocking too)? 2. WHich hard disk brand is better, Seagate-WesternDigital-Maxto...
Summary: right my mum is selling her house , which means with some of the money she is getting me the best pc money can buy . only thing is im totally stuck w...
Summary: I am going to OC an amd athlon xp 2500+ barton, but need to decide which ram to buy. I like the corsair XMS/kingston hyper X ram, but I would really p...
Summary: Looking to get the most out of this board. My current settings in the bios are: CPU speed=manual, CPU Freq Multple=10.5X, CPU External Freq=133/33, Me...
Summary: It's always helpful to post the make/model of the motherboard. Did you go to the manufacturer's website to see which CPUs & which RAM is supported? Di...
Summary: (1). Generally speaking, yes, but how much higher depends on your RAM and other components in your system; (2). Again, depending on which RAM you are ...
Summary: "The option for 200 MHz never became available until I put in the 2600+..." That's BS. It was ALWAYS an option. From the MSI website: "• Supports So...
Summary: Those are NOT the complete specs. We need to know the core the CPU is based on, that's why I asked you to run CPUZ. We already know you have an A64 30...
Summary: You can go a heck of a lot higher than 3.0GHz. But we need to know the exact make/model of your motherboard & which RAM you have. Video card make/mode...
Summary: What are you trying to accomplish? What do you expect to gain from a mere 200MHz overclock? That's just a 7% increase...do you really think you'll not...
Summary: My Computer boots up when it wants to it gets stuck sometimes on verifing DMI pool data .... or when u try to enter the bios. This has started since i...
Summary: I recently had a problem with my 2.4Ghz P4 CPU showing it was at 1.79Ghz. The tech guy I called who built my PC said it was because my MB didn't suppo...
Summary: MB is DFI NF II Ultra-AL... there is no jumper for FSB, its all done through bios.... when I set it above 182 it starts to boot but when it gets...
Summary: Hi, I have an Acer Aspire 1705SCI which is supposed to be able to handle 2GB of ram. I had already a ram bar of 256MB installed (Nanya 256MB PC2700 D...
Summary: Thanks all, real_cool my motherboard support 533MHz, I have set the settings to use 200Mhz RAM speed instead of 266MHz but after overclocking and usin...
Summary: ok where to start , im thinking of buying some new ram for my pc and i think dual channel is the way to go. however im not sure which to choose , im ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
