Summary: What is the cd-rom volume label for a Windows NT 4.0 Server Enterpise Edition? I have NT 4.0 Workstation and it's volume label is NTwks40a so What is ...
Summary: I really think that you should be able to change hard drives in your BIOS setup in a 486 33. I have not seen a 486 or 386, for that matter, that only ...
Summary: Hi Thanx for the links, but I still can't get windows 31. and 3.11 to realize the cd-rom is there, I know there is a driver that you can use for most ...
Summary: Well? Anyone? In your experience what is the BEST Anti-Virus for Win 3.1? Or at least that runs on this OS...(Well DOS really I suppose...) ...
Summary: Basically, I am trying to build a box that will do it all. 3x, 9x, NT, and XP. Not surprising, the biggest hurtle seems to be finding a video card th...
Summary: You will want to delete lines in both the config.sys and autoexec.bat. From windows open notepad (by default in your ACCESORIES group). Go to the root...
Summary: Those versions should run pretty well I think. The P-133 is great, but the 8MB RAM might be a bit low. If you find it to be a problem, you might want ...
Summary: If it's not IDE then it's probably SCSI. Get a SCSI PC Card and cable and use that to plug it in. Most of the older (1X and 2X) CD - ROMs were SC...
Summary: komando, You didn't say what type of external Mitsumi CD-ROM drive you have. Is it parallel port or SCSI. In either case PS'2s need ADFs (Adapter Desc...
Summary: I think the problem you have is that you need a cd-rom driver for win 3.1 (16 bits) You can find what you need here http://briefcase.yahoo.com/bc/free...
Summary: If you downloaded CDGOD55.exe from: http://www.geocities.com/politalk/cdrom/cddos.htm what you need to do is run the program with a new (empty) disk ...
Summary: I am trying to figure out what the "MTM" subdirectory stands for when I install the Mitsumi CD rom driver on my machine with setupd.exe. I am in an A...
Summary: My computer recently went completely kaput, lost all data. Reinstalled what I could find, but can't find the drivers for my CD Rom or my modem, an...
Summary: I have a win 3.1 system on a machine with a TEAC E46 cd rom drive. I dowloaded the driver from TEAC. It is a DOS driver, but has windows 3.1 and 95 f...
Summary: First thing to do is see if the drivers are installed at boot up. When you see message starting ms-dos, push the F8 key, and then answer yes to each ...
Summary: Insure that drive power is on and drive cables correctly attached." I am getting this error message after the POST and BIOS read outs. After turning o...
Summary: Marko, hope you don't regret having offered your help... I have the same problem, installed a cd-rom drive on an old IBM 486 computer with Windows 3.1...
Summary: Hi John: On some install disk the original disk have labels (like disk 1), but some need to be exact to work, don't know the label info for office. To...
Summary: Why is it so hard to find floopies with win95 on it. can anyone send me it threw e-mail etc. I have cable. I tryed a site but the disk two does not w...
Summary: You do not give the Model Number. Check the label on the CD-ROM itself and compare with this list of drivers @ http://www.lgeus.com/service/download....
Summary: If the CD-ROM drivers you downloaded are in a zip file, then use the WINZIP command extract and point it to your a: drive. If it is a ZIP file and you...
Summary: Ok, sorry about the assumption, the path: C:\WINDOWS\COMMAND\ .. is usually only on Win9x systems. Don't worry about 'devicemanager' - there is no r...
Summary: Have you people ever heard of SEARCH ENGINES? The Reveal SC400 Sound Card & CD-ROM Drivers can be found at: http://www.windrivers.com/company/reveal/i...
Summary: from what I know, 486 packard bells have a cd-rom attached to the sound card and not to the motherboard IDE connector. The sound card also may have a ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
