Summary: My friend has a westell modem. It's a 2100 series. He wants to hook it up though USB but he has to have the drivers. He didnt get a CD with the mode...
Summary: I would try a different network card. I have the same card and it sucks with win98se or at least it did on my computer. It worked fine with 95 though...
Summary: Usb 2.0 adapters are pretty good because they are 40x faster and doesen't require any NIC. If you want to share that connection, you're going to need ...
Summary: ok, so you enabled Internet Connection Sharing (ICS) on the XP pc, correct? What shows when you run an IPCONFIG /ALL. You said you renewed the IP addr...
Summary: right...any help on this would be greatly appreciated!!...will try to explain it my best.. finally my exchange has been ADSL enabled and i am using Ec...
Summary: i have a moterolla surboard 4100 cable modem with USB and ethernet connection. my internet works fine with ethernet but when i want to use USB for my ...
Summary: wuts up? probably a dns error, either that or itz usin sumthin else other than your usb wire. take outall the modems, network adapters, those stuf u d...
Summary: The Voyager 100 is a USB Modem. The Voyager 200 is a router with both USB and a single Ethernet port. To use the the Voyager 200 you are going to hav...
Summary: if i plug it my computer straight into the computer it still won't connect. tried it with the usb drivers installed, and it still won't work. im prett...
Summary: That depends what software you installed. Normally the only time software needs to be installed on the computer to activate DSL is if you are using a...
Summary: Depending on which version of that wireless adapter you own, you might be able to use the drivers from the chipset's site, Ralink. Here's a thread ab...
Summary: If you have a BT Voyager 2500V use it and stop messing about with ICS. The 2500V is a good router with built in modem, wireless and VoIP capabilities...
Summary: The dlink 502t router has USB/Ethernet output connections. So the simplest solution is to connect your computer to the via the USB connection and the...
Summary: the only update is usb drivers,, but they did ask me to rename some system files. Will put back the card,, and give it a shot.. after I print out the...
Summary: I,m afraid you are barking up the wrong tree. The MSComm control is for use with Communications Ports, that means RS232 serial ports, not USB ports. ...
Summary: It's been my experence that any difference, even very slight bios differences on the mother board will hose up an image install. I've learned, (the ha...
Summary: 1st: "Free Technical Support-24 Hours a Day, 7 Days a Week, Toll-Free US Calls" 2nd: "Compatible with Microsoft Windows 98SE, Me, 2000, and XP" = Wind...
Summary: But the current models Motorola has out apparently do not support Vista either as Vista is excluded on their hardware specs, or compatibility lists. ...
Summary: when I click on the Linksys WAP11 USB Configuration Utility Status it says "Access Point was not found. The USB driver has not been loaded. what does...
Summary: Hi all, attempting to install a wireless router and share a broadband connection. My modem is a Motorola surfboard. Modem works fine using the USB con...
Summary: Hi, I am reluctant to mess with with AOL ADSL Broadband setup here in the UK but at the request of a client undertook the task. Bought a cheap £35 co...
Summary: I've got a network setup with Bellsouth DSL that was working fine until today. I use the 2wire 1000sw modem/router and so far it's been great. I have ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
