Summary: Are you using an 80-conductor cable for the 120GB drive? By mistake I used a 40-conductor cable on the PCI IDE card. My system would not boot either. ...
Summary: Sorry, did you want to know if IDE cards which give you the ability to plug more drives into the case come with DVD decoders. If so, no. You can buy ...
Summary: Help, I have fitted a ultra ata 100/133 pci ide controller card to give me another ide channel so that I can have a zip drive, all seemed to go well, ...
Summary: I am running a HP 8754C PIII 800mhz 384MB ram..I am having major lockup's from a OPTI 82C861 Pci to USB card..I checked the www.opti.com for any drive...
Summary: I am running a HP 8754C PIII 800mhz 384MB ram..I am having major lockup's from a OPTI 82C861 Pci to USB card..I checked the www.opti.com for any drive...
Summary: i bought an HP a705w from a friend that was "hit" by a storm last month . he said it wouldnt boot up so i bought the case, MB , hard drive , and CPU (...
Summary: I bought PCI Card that provides 2 extra USB ports, the card has no problem in running and works when I plug my USB keyboard in. But when I tried to co...
Summary: My AGP video card recently died. So I borrowed a PCI video card of a friend and stuck it in. It all worked but now when i get to the desktop and after...
Summary: I have a probblem booting with a cd,i've explored the disk and everything seems to be there.I changes the BIOS to boot with cd first,then the hard dr...
Summary: First of open thecase and take out the CMOS battery, or even reset the CMOS using the reset jumper. see if this works. If not, then try to boot with n...
Summary: remove all the hardware other than mobo and video card and xp wont install with that vid card so you will likely need to use other vid card to install...
Summary: That's probably correct. If the controller does not have 48 bit LBA compatibility, that will be the case. Check http://www.48bitlba.com/ for more info...
Summary: All i was saying is i had this card about 5 years ago.. If you go to the ATI website and read up on the system requirements is states Win98 and Win ME...
Summary: I GOT BELLSOUTH ADSL, BUT WINDOWS XP WONT INSTALL NIC CARD DRIVER, SO AFTER DOING EVERYTHING POSSIBLE TO GET THE NIC WORKING, NO LUCK, SO I BOUGHT ANO...
Summary: I use an IDE PCI controller card and it works fine.I would think a SATA controller would work equally well.In case of a system reinstall drives on a P...
Summary: i have assigned manual ips for both, the first adapter (gigabit onboard) is for my satellit receiver (dbox2)>192.168.5.3, this is strange because it o...
Summary: I've just bought a ASUS A7V66-E motherboard with a Athlon XP 1700+ processor. I installed everything and I've got the BIOS all setup, but when it goe...
Summary: Dunno why, but since a few weeks, while no change has been made to my pc hardware, I began to have this annoying pblm: I have several hard disks on ...
Summary: my computer has been nothing but trouble when i fist got it it was locking up and reseting itsself cus 300w powersuply wasent cutting it was getting ...
Summary: Last night before I left to goto dinner I started encoding a movie. I do the same thing every night with no problems at all. When I got home last nigh...
Summary: Each MBo usually has two channel IDE1 and IDE2. Each supports up to two IDE devices. If you install two devices on one ribbon cable, you must set one ...
Summary: How I fixed a similar problem. I have a NetMos MP9715 dual parallel card (bought about 6 months ago) which worked just fine on NT 4.0 SP 6. I just up...
Summary: I recently added a 512 stick of kingston value ram memory into my foxconn NF4UK8AA board and when i booted up my computer i got a message "your system...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
