Summary: well i have posted this before but wasnt so clear on my information. the cpu is running 1.15ghz and it is suppose to run at 1.53ghz. i know that i wil...
Summary: I had Motherboard Monitor 5 and the CPU speeds were always around 2814Mhz....(nothung is overclocked). But then I upgraded MBM5 to itīs newest version...
Summary: i have a p4 2.8 in my computer properties it has to different ghz first it says 2.8ghz then 1.39ghz when i start up my computer it says it a p4 1.39 i...
Summary: try running somthing like prime95 that get the chip running at 100% then check the cpu speed. At that time i bet you get your full processor speed. ...
Summary: Im not good at hardwares and stuff, but i figured out that something is wrong. I started a program Motherboard Monitor 5 and I tested my computer. It ...
Summary: Hello Now this time, I think I seriously messed something up this time. I just bought an Athlon XP 1700 system (with a chaintech ct-7aja2) motherboar...
Summary: I have a 766/128/66/1.7 v celeron Socket 370. Since I had problem with my old mobo I decided to buy a new one. I bought a Biostar M6VLR http://www.bi...
Summary: ok i have 18ooxp cpu GA-7VTXE+/7VTXH+ thats what it says front of manul 128 ddr ram winfast a170 gf4 mx my problem is that i can get cpu running at r...
Summary: thank you sterling! That would make sense... just wondering, should I change both the ram and cpu speed to 133 or just one of them? (the setting goes...
Summary: Ok I am confused, I have a Soyo-K7ada motherboard that says it can support up to 2100+ i installed a 1900+ and it is running as an Athlon 1500+ i went...
Summary: i need help. my cpu speed decreased and i know there is a way to change the bios or somethinglike that to speed it up but someone told me if u set it ...
Summary: Just today as I was checking some things on my system, I noticed that the CPU speed was reporting 1252mhz. This is not the normal speed for a 2800+ a...
Summary: Have a strange problem with an old pc (P4, 2 ghz processor) I inherited. When I start it up it goes to the set up screen and tells me my cpu speed is ...
Summary: After having to replace my motherboard, my computer is registering my cpu as an athlon 2000 instead of the athlon 2600, obviously the shop that instal...
Summary: Irecently bought a athlon xp 2200 barton wich speeds should be at 1.8 or sumtin like that.....well i got the cpu and hooked it up adn it ran at like 1...
Summary: Most laptops will run the CPU at full speed when it's plugged into the AC, but on battery power, the CPU speed will vary (depending on load) to preser...
Summary: Hey. I tried to overclock. My default cpu speed was 266mhtz, I overclocked it to 300mhtz, but it says its only 200mhtz! It says in the manual that...
Summary: Laptops tend to run fairly warm. CPU speed varies depending on load. At idle, your CPU may be running as low at 800MHz, possibly lower...this is done ...
Summary: I have read other posts on these forums, updated my bios, reset the CMOS.No changes ,but there is something unique about my scenario. When I go to pro...
Summary: I got a P4 1.7Gz CPU and in the BIOS there's an option bout CPU/PCI Frequency (Mhz) and it was set 100/33. I set it to 112/35 and it will give me 1.9G...
Summary: Yo: Your 2000+ CPU actually runs internally at 1670mhz and your 1800+ should be have run at 1530mhz. This is due to AMD using their "Performance Ratin...
Summary: TURN OFF THE CAPS LOCK! I'm not an Intel guy, but isn't the P4 3.2 an 800FSB CPU? So the clock setting should be 16 x 200mhz, correct? It appears that...
Summary: I tried overclocking and underclocking,but it will not let me(pc just freezes).As far as temps,they WERE in the mid 70's,but after I installed these f...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
